Re: [Make-wifi-fast] 2.4Ghz hybrid wiring for nest protects

[Aaron Wood <woody77@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 3248 bytes --]

I've seen similar techniques used for creating isolated wifi device test
labs.  Each device is locked into a small RF isolation box, with bulkhead
fittings for power and coax.  A 2.4GHz (or 5GHz antenna, or both) is placed
inside the box, and then the boxes are wired to one another in any topology
that is desired.  splitters of course dropping the signal in the coax, but
really not much more than in the air.

You might want to do some test setups with cheap isolation boxes of wire,
to see how much signal you'll get through your antennas and coax.

On Mon, May 17, 2021 at 11:09 AM Bob McMahon via Make-wifi-fast <
make-wifi-fast@lists.bufferbloat.net> wrote:

> Hi All,
>
> There is a historic building that has 5 floors and no fire alerting
> associated with the rear fire escape ladder. I'm considering installing
> nest protects in each unit near the rear egress to alert of the fire escape
> is compromised by fire. My guess is floor to floor wireless communications
> may not work too well.
>
> I'm thinking about cleaning up the communications runs in the rear of the
> building. The cable company did a shoddy job of hanging cable for TV
> services in the 80s. It seems a good time to add communications conduit and
> run more modern cabling.
>
> As part of this, I'm considering running LMR 600 cabling on the exterior
> brick wall to act as 2.4Ghz communications wave guides. I was thinking make
> a loop but break the loop at each floor with a 2.4Ghz wilkinson power
> divider
> <https://www.pasternack.com/2-way-n-wilkinson-power-divider-690-mhz-2.7-ghz-10-watts-pe2092-p.aspx?utm_source=google&utm_medium=cpc&adpos=&scid=scplpP74039&sc_intid=P74039&gclid=CjwKCAjwqIiFBhAHEiwANg9szk1JG2oJufz2G2Hylc6oOgOSl-tBN5O39Kn2T1pHV4g8_r8AnkFA7xoCFhUQAvD_BwE>.
> Then bore a hole into each unit and install a 2.4Ghz patch antenna
> <https://www.l-com.com/wireless-antenna-24-ghz-8-dbi-round-patch-antennas>
> pm each rear interior wall. Each unit would then install a Nest protect on
> the ceiling from the patch antenna. The ring or loop topology I think gives
> a bit of redundancy.
>
> Thoughts on if this would achieve the goals of supporting nest protect
> communications for such a building?
>
> Bob
>
>
>
>
> This electronic communication and the information and any files
> transmitted with it, or attached to it, are confidential and are intended
> solely for the use of the individual or entity to whom it is addressed and
> may contain information that is confidential, legally privileged, protected
> by privacy laws, or otherwise restricted from disclosure to anyone else. If
> you are not the intended recipient or the person responsible for delivering
> the e-mail to the intended recipient, you are hereby notified that any use,
> copying, distributing, dissemination, forwarding, printing, or copying of
> this e-mail is strictly prohibited. If you received this e-mail in error,
> please return the e-mail to the sender, delete it from your computer, and
> destroy any printed copy of it.
> _______________________________________________
> Make-wifi-fast mailing list
> Make-wifi-fast@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/make-wifi-fast

[-- Attachment #2: Type: text/html, Size: 3943 bytes --]