Re: [Cerowrt-devel] hardware hacking on fq_codel in FPGA form at 10GigE

[dpreed at reed.com]

I have lately been using (for my very wideband software defined radio amateur radio transceiver project) the brand new, very nice device called the Zynq 7000 series of Platform FPGA's from Xilinx.  It's a complete system on a chip, with a dual core ARM Cortex A9 and an enormous amount of programmable logic that has "cache coherent access" to the memory system.
 
The chip is fabricated in 28 nm form, has a "zillion" SelectIO programmable pins, but more importantly has a bunch of hard logic I/O paths.
 
Since it comes packaged "cheap" (full  6 inch square evalboard with 512 MB DRAM and full standard "PC type" interconnects - GigE, VGA, HDMI, USB), as a $299 board with free FPGA tool chain) and runs Linux out of the box, I highly recommend the board called Zedboard (just google that).
 
Easy to attach 10 GigE hardware if you can do simple PCB design and soldering.
 
You can be up and running with a development system for under $500 in a weekend, building FPGA acceleration, or if you want to add hardware that connects to the zillions of I/O pins to the PLL and memory system, that might take a week or more, depending on your hardware design and hacking skills. I've connected "eval boards" of various sorts using a breakout board you can buy from Xilinx quicker than that.
 
In some ways, this is the Raspberry Pi of high speed digital logic hacking.
 
 
 
 
-----Original Message-----
From: "Hal Murray" <hmurray at megapathdsl.net>
Sent: Thursday, December 20, 2012 5:32am
To: "Dave Taht" <dave.taht at gmail.com>
Cc: "bloat-devel" <bloat-devel at lists.bufferbloat.net>, codel at lists.bufferbloat.net, "Hal Murray" <hmurray at megapathdsl.net>, cerowrt-devel at lists.bufferbloat.net
Subject: Re: [Cerowrt-devel] hardware hacking on fq_codel in FPGA form at 10GigE



dave.taht at gmail.com said:
>> If I was going to do something like that, I'd build a small/simple CPU
>> the work in microcode.

> There are two ppc 440 cpus already onboard the 10GigE device, I think. It's
> a REALLY NICE fpga. 

> I'd also looked at the octeon and the latest arm chipset from TI which I
> can't remember the codename for at the moment... 

I wasn't thinking of a traditional general purpose CPU but rather something 
special for this problem.



>> How many lines of assembler code would it take?

> I could do a dump of the current code into any given assembly language. It's
> not a lot, but there are a lot of out of band functions.

I didn't mean lines of traditional assembly code.  If we want to pursue this, 
pick a chunk of c code (not too big) and break it into "lines" where 
everything on a line can be executed at the same time.  I'll try to sketch a 
"CPU" and write the microcode.


> The enqueue and dequeue algorithms are entirely decoupled, with the
> exception of this error handling phase of (out of queue space) One thought
> would be to track packet count on enqueue (this is more "sfq"-like than
> fq_codel-like) which still has a tiny lock... 

Stuff that can be reasonably done in the driver should probably be done there 
if it saves a lot of work for the microcode.  Avoiding out-of-queue-space 
might be a good example.



> Well there are a few things that would benefit from moving directly into
> hardware - the 5 tuple hash, for example. 

I'm probably missing the big picture.  Are you building a router or a server?

A server has socket control blocks.  Can the hash be precomputed and stored 
there?
That doesn't help with UDP sendto, but I think it would work with TCP.


If you are building a router, does the routing as well as fq-ing have to fit 
in the FPGA?


-- 
These are my opinions.  I hate spam.



_______________________________________________
Cerowrt-devel mailing list
Cerowrt-devel at lists.bufferbloat.net
https://lists.bufferbloat.net/listinfo/cerowrt-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat-devel/attachments/20121220/547aaa22/attachment-0001.html>