[Bloat] Progress with latency-under-load tool

[Jonathan Morton]

Attached is the initial version of the loadlatency tool.  I'm getting some rather interesting results from it already, although it does take a very long time to run.

It works under Linux, Cygwin and MacOS X on both little- and big-endian machines (and between machines of different byte-sexes), and therefore it should also work under FreeBSD and other UNIXes.  I haven't yet tried compiling it for iOS or Android.

It produces useful results even when one of the machines is rather old and slow, despite using a proper PRNG for traffic generation.  My ancient Pentium-MMX proved capable of generating at least 4.4 MB/s of traffic steadily, and probably produces spikes of even greater bandwidth.  Anything of Y2K vintage or newer should be able to saturate it's network with this.

There are four measures produced:  Upload Capacity, Download Capacity, Link Responsiveness and Flow Smoothness.  All of these are reported in "bigger is better" units to help deal with Layers 8 and 9.

The Capacity calculations are a bit complex to understand.  For each flow (in either direction), the average goodput is measured over the entire lifetime of the flow.  All of the flows in each direction for that scenario are the aggregated by taking the harmonic mean and multiplying by the number of flows; this biases the total downwards if the flows were mutually unfair.  Finally, the relevant measures across all scenarios are aggregated using the harmonic mean, thus biasing the overall measure towards cases of under-utilisation.  The totals are then reported in binary kilobytes per second.

The Link Responsiveness measure is much easier.  I simply take the maximum latency of the "pinger" channel (which is also used for commanding flows to stop) and invert it to produce a measure in Hertz.  This is rounded down to the next integer for display; if you see a zero here (which is surprisingly likely), it means that a latency of more than one second was encountered at some point during the entire test.

The Flow Smoothness measure refers to the application-level data inter-arrival timings.  The maximum delay between data chunks arriving is measured across all flows in all scenarios, but excludes the first megabyte of each flow so as to avoid picking up the RTT during TCP startup.

Here are some numbers I got from a test over a switched 100base-TX LAN:

    Upload Capacity: 1018 KiB/s
  Download Capacity: 2181 KiB/s
Link Responsiveness: 2 Hz
    Flow Smoothness: 1 Hz

Horrible, isn't it?  I deliberately left these machines with standard configurations in order to show that.

 - Jonathan

-------------- next part --------------
A non-text attachment was scrubbed...
Name: loadlatency.tar.gz
Type: application/x-gzip
Size: 6651 bytes
Desc: not available
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20110320/3f0b977b/attachment-0003.bin>