[Bloat] First-time install on brand new WNDR3700v2 not working

[Shane Turner]

I have a neglected WNDR3700v2 at home, still in the box, waiting to be 
flashed and tested with. Which firmware did you choose in the end?

http://huchra.bufferbloat.net/~cero1/rc7-smoketests/rc7-smoketest8/openwrt-ar71xx-generic-wndr3700v2-jffs2-factory.img
or
http://huchra.bufferbloat.net/~cero1/rc7-smoketests/rc7-smoketest8/openwrt-ar71xx-generic-wndr3700v2-squashfs-factory.img

In what way did you deviate from the procedure at 
http://www.bufferbloat.net/projects/cerowrt/wiki/Cerowrt_flashing_instructions 
to get it working? Did you have to rename the file? Did you have to 
flash to OpenWRT first?

Shane

On November-03-11 12:30:05 AM, Jim Reisert AD1C wrote:
> On Wed, Nov 2, 2011 at 3:39 PM, Maxim Kharlamov wrote:
>
>> What I ended up doing is:
>> 1. did 30-30-30 reset (described, for instance, here:
>> http://www.myopenrouter.com/article/18623/How-to-Hard-Reset-Your-NETGEAR-WNR3500L/)
>> 2. flashed OpenWRT using netgear web gui (it shows a warning but allows to
>> continue)
>> 3. another 30-30-30
>> 4. flashed CeroWRT from OpenWRT gui
>> 5. profit!
>
> I'm up!  Thanks, Max!
>
> I was unable to load the CeroWRT code from the OpenWRT GUI, but was
> able to reset the router then TFTP the image in.
>