[Bloat] First-time install on brand new WNDR3700v2 not working

Fri Nov 4 02:11:52 PDT 2011

Hi Petri,

I used
http://huchra.bufferbloat.net/~cero1/cerowrt-wndr3700-1.0rc6/openwrt-ar71xx-generic-wndr3700v2-squashfs-factory.imgimage,
to be precise. It works with wndr3800 (apart from those flashing
problems I described).
I'm getting ge00 issues in all three cases: a) PPPoE on ge00 directly
connected to the ADSL modem; b) DHCP on ge00 connected to the main router
with ipv6 support; c) DHCP on ge00 connected to an old router without ipv6
support.
Couldn't find libposlib.so.1 neither in the file system nor in the
packages. But even if I could, I suspect that dibbler client is not a
proper solution. Openwrt docs suggest using wide-dhcpv6-client which
doesn't exist on the opkg list either.

All those issues are not a big deal, actually. The main thing is that I
don't know what to do with this router now. It's not ready to become my
main one, but I still want to conduct some experiments with it. Any ideas
of what could be useful?

Thanks,
Max

On 4 November 2011 21:37, Petri Rosenström <petri.rosenstrom at gmail.com>wrote:

> Hi Maxim,
>
> On Fri, Nov 4, 2011 at 8:53 AM, Maxim Kharlamov <mcs at podsolnuh.biz> wrote:
> > Hi Dave,
> >
> > Well, at least for rc6 jffs2 factory image the tftp update method didn't
> > work. I tried many times and tried renaming the image file - no luck
> (file
> > transferred but completely ignored). Maybe it's a quirk of wndr3800,
> don't
> > know.
> You probably mean rc7-smoketest6, because rc6 doesn't include image
> for the wndr3800. I didn't get the wndr3700v2 images to work they
> required the small patch for it to work.
>
> > After installing openwrt I uploaded cerowrt rc6 factory squashfs image.
> Did
> > you mean that I should've uploaded sysupgrade version instead?
>
> You should have could used it, if you tried from the webinterface. I
> at least was successful with this. btw. I run jffs2 image.
>
> I have only had a few issues, but I hope that are already fixed. I
> just have to tests it. My issues are related to bug 291. This patch
> might be in rc7-smoketest8.
>
> >
> > First impressions:
> > * Ge00 interface not getting up automatically. Every time I restart the
> > router, I need to do 'ifup ge00' or bring it up via web interface.
> I haven't these issues. My first feeling is that this could be related
> to your ISPs IPv6. btw have you tried the latest image and do you have
> this issue if you are connected to your (other) router and directly to
> the ISP?
>
> > * Lack of opkg packages: I installed kmod-usb-serial, but couldn't find
> > kmod-usb-serial-option, usb-modeswitch, usb-modeswitch-data or sdparm;
> > consequently, couldn't get my 3g dongle to work. Cerowrt sees it as a usb
> > cd-rom.
> >    If I remove kmod-usb-storage, it kinda sees it as a usb serial device,
> > but cannot do anything with it.
> I also have a 3G usb-dongle. I'll try this tomorrow. They are probably
> not built as packages, because I think that they are in the sources.
> Maybe file a feature request in the
> http://www.bufferbloat.net/projects/cerowrt/issues . Otherwise there
> are similar packages in
> http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/ but I
> say don't use them :)
>
> > * DHCPv6-PD isn't supported. Looks like it is scheduled for 1.2? My ISP
> uses
> > DHCPv6-PD to delegate /48 ipv6 prefixes. Meanwhile I installed
> > dibbler-client, but can't run it: "can't load library 'libposlib.so.1'"
> I would recommend that you verify that you don't have this file on the
> filesystem (find / -name libposlib.so.1). Then you could search for
> the file with (pkg search \* libposlib.so.1). And if it finds it
> install the missing package and retry.
>
> >    When I connected the router to my main ipv6 enabled router, it was
> able
> > to pick the ipv6, but something still wrong with the dns - it only works
> for
> > ipv4. Not sure exactly what is happening.
> >
> >
> > Thanks,
> > Max
> >
> >
> >
> > On 4 November 2011 03:22, Dave Taht <dave.taht at gmail.com> wrote:
> >>
> >> Wow. 3 flashers in one day. (there is no specific cerowrt list, this is
> as
> >> good a place as any, at least for now)
> >>
> >> I will try to improve the flashing instructions but to clarify here:
> >>
> >> the 'FACTORY' images are are for installing when you have factory
> firmware
> >> installed. Usually, but *not always*, you can install that via the
> factory
> >> web interface, but always, you can install via a tftp update.
> >>
> >> The 'SYSUPGRADE' images are for when you have a prior version of
> openwrt,
> >> cerowrt, dd-wrt, etc, already installed.
> >>
> >> JFFS2 vs squashfs is a matter of personal choice. If you plan to do lots
> >> of development or coding on the router, go with jffs2. Otherwise
> squashfs
> >> saves space.
> >>
> >> I'm really delighted to see people trying cerowrt out (and all on a day
> >> while I was offline!). I look forward to any feedback you might have.
> (bugs,
> >> features on the wiki please)
> >>
> >> but: I have to note that although rc7-smoketest8 is proving out pretty
> >> good... it's what I call a 'smoketest', not even a release candidate. I
> try
> >> to come out with smoketests once a week, and my hope was to get rc7
> itself
> >> out in ~2 weeks...
> >>
> >> but as we're lagging  the kernel development cycle by a little bit too
> >> much (and some core trees are only just now coming online again) I'm
> going
> >> to slip a whole bunch of stuff out of rc7's roadmap.
> >>
> >> What I've been burning mental cycles on - is that now that I'm
> relatively
> >> happy with the wireless performance and overall stability/features - is
> >> trying to improve the gateway AQM system to suck a little less. Which is
> >> proving to be hard. And also improving wireless latency further using a
> sane
> >> classifier with QFQ - which is also proving to be hard although I have
> more
> >> of a grip on that at the moment.
> >>
> >> Anyway, don't expect miracles from cero yet! Bloated queues move to your
> >> laptop, and upstream links - which are also bad places for them! -
> fixing
> >> your laptop is relatively easy - upstream link harder - you have to fix
> >> bloat everywhere you can.
> >>
> >>
> >>
> >>
> >>
> >> On Thu, Nov 3, 2011 at 12:54 PM, Shane Turner <turner at chebucto.ns.ca>
> >> wrote:
> >>>
> >>> I have a neglected WNDR3700v2 at home, still in the box, waiting to be
> >>> flashed and tested with. Which firmware did you choose in the end?
> >>>
> >>>
> >>>
> http://huchra.bufferbloat.net/~cero1/rc7-smoketests/rc7-smoketest8/openwrt-ar71xx-generic-wndr3700v2-jffs2-factory.img
> >>> or
> >>>
> >>>
> http://huchra.bufferbloat.net/~cero1/rc7-smoketests/rc7-smoketest8/openwrt-ar71xx-generic-wndr3700v2-squashfs-factory.img
> >>>
> >>> In what way did you deviate from the procedure at
> >>>
> http://www.bufferbloat.net/projects/cerowrt/wiki/Cerowrt_flashing_instructions
> >>> to get it working? Did you have to rename the file? Did you have to
> flash to
> >>> OpenWRT first?
> >>>
> >>> Shane
> >>>
> >>> On November-03-11 12:30:05 AM, Jim Reisert AD1C wrote:
> >>>>
> >>>> On Wed, Nov 2, 2011 at 3:39 PM, Maxim Kharlamov wrote:
> >>>>
> >>>>> What I ended up doing is:
> >>>>> 1. did 30-30-30 reset (described, for instance, here:
> >>>>>
> >>>>>
> http://www.myopenrouter.com/article/18623/How-to-Hard-Reset-Your-NETGEAR-WNR3500L/
> )
> >>>>> 2. flashed OpenWRT using netgear web gui (it shows a warning but
> allows
> >>>>> to
> >>>>> continue)
> >>>>> 3. another 30-30-30
> >>>>> 4. flashed CeroWRT from OpenWRT gui
> >>>>> 5. profit!
> >>>>
> >>>> I'm up!  Thanks, Max!
> >>>>
> >>>> I was unable to load the CeroWRT code from the OpenWRT GUI, but was
> >>>> able to reset the router then TFTP the image in.
> >>>>
> >>> _______________________________________________
> >>> Bloat mailing list
> >>> Bloat at lists.bufferbloat.net
> >>> https://lists.bufferbloat.net/listinfo/bloat
> >>
> >>
> >>
> >> --
> >> Dave Täht
> >> SKYPE: davetaht
> >> US Tel: 1-239-829-5608
> >> FR Tel: 0638645374
> >> http://www.bufferbloat.net
> >>
> >> _______________________________________________
> >> Bloat mailing list
> >> Bloat at lists.bufferbloat.net
> >> https://lists.bufferbloat.net/listinfo/bloat
> >>
> >
> >
> >
> > --
> > Thanks,
> > Max
> >
> >
> > _______________________________________________
> > Bloat mailing list
> > Bloat at lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/bloat
> >
> >
>

-- 
Thanks,
Max
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20111104/5679e106/attachment-0001.html>