[Bloat] First-time install on brand new WNDR3700v2 not working

[Maxim Kharlamov]

Hi Dave,

On 6 November 2011 09:33, Dave Taht <dave.taht at gmail.com> wrote:

> rc7-smoketest10 is out in the usual place.
>
> Fix for the wifi detect routine, re:
>
> https://dev.openwrt.org/ticket/10350
>
> Also jow had been busy abstracting out network protocol support from the
> web interface, I added ipv6 as std, 3g as optional. (package is
> luci-proto-whatever)
>
> TOTALLY untested.
>
> slightly more below.
>
>
Updated to smoketest10.
Those features are slightly tested now. After installing the necessary
packages, 3g and pppoe work, dhcp6c also seems to be OK, but requires some
messing with the /etc/config/dhcp6c.conf file.



> On Sat, Nov 5, 2011 at 8:55 PM, Maxim Kharlamov <mcs at podsolnuh.biz> wrote:
>
>>
>>
>> Ge00 didn't start up after commenting out ethtool, so I suspect it was
>> slightly different issue. I've just updated to rc7-smoketest9, however, and
>> the problem is not happening anymore, so I consider it was somehow solved.
>>
>>
> Good. Were you plugging it into a switch before?
>

Yes, it is always plugged to a switch.


>
>
>>
>>
>>>
>>>
>>>> * Lack of opkg packages: I installed kmod-usb-serial, but couldn't find
>>>> kmod-usb-serial-option, usb-modeswitch, usb-modeswitch-data or sdparm;
>>>> consequently, couldn't get my 3g dongle to work. Cerowrt sees it as a usb
>>>> cd-rom.
>>>>
>>>
>>> we're very interested in bloat on 3g. What dongle do you use?
>>>
>>>
>>>>    If I remove kmod-usb-storage, it kinda sees it as a usb serial
>>>> device, but cannot do anything with it.
>>>>
>>>
>>> Your wish is my command. see rc7-smoketest9 for these additional
>>> optional packages.
>>>
>>>
>> Thanks for including all these packages, my 3g dongle now works. It is
>> ZTE MF636 (Telecom New Zealand). Speedtest shows 5.5mb/1.35mb/104ms, which
>> is a great result.
>> Will do some more testing later.
>>
>>
> I'm curious as to what the txqueuelen defaults to on that.
> 104ms ping times? Ugh.
>
>
ifconfig shows txqueuelen:40



>
>
>>
>>> I note it's best to NOT preserve settings over a reflash. SOMETIMES you
>>> can switch opkg repos to the latest, particularly when the kernel doesn't
>>> change - but not on smoketests....
>>>
>>> * DHCPv6-PD isn't supported. Looks like it is scheduled for 1.2? My ISP
>>>> uses DHCPv6-PD to delegate /48 ipv6 prefixes.
>>>
>>>
>>>
>>>>
>>>>
>>> You have an ISP THAT DOES PD? Where? Who? Wow.
>>>
>>>
>> Snap Internet, New Zealand.
>>
>
> They take immigrants?
>

We are welcome :)


-- 
Thanks,
Max
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20111106/fb8bd6db/attachment-0001.html>