[Bloat] Windows file sharing broken with RC6 ?

[Jim Reisert AD1C]

> 1) install wins support with the samba3 package (via:
>
>  opkg update
>  opkg install samba3 luci-app-samba

Did this via the ssh interface, seems to have worked OK:

root at OpenWrt:~# opkg install samba3 luci-app-samba
Installing samba3 (3.0.24-7) to root...
Downloading http://huchra.bufferbloat.net/~cero1/cerowrt-wndr3700-1.0rc6/packages/samba3_3.0.24-7_ar71xx.ipk.
Installing luci-app-samba (trunk+svn-1) to root...
Downloading http://huchra.bufferbloat.net/~cero1/cerowrt-wndr3700-1.0rc6/packages/luci-app-samba_trunk+svn-1_ar71xx.ipk.
Configuring samba3.
Configuring luci-app-samba.
root at OpenWrt:~#

> 2) configure it to be in the workgroup and announce on the subnets. It
> should then become the    'master' browser for that domain.
>
> While I recall this setup as straightforward (edit either /etc/config/samba
> and/or /etc/samba/smb.conf.template) and used it to share a flash disk
> across a XP/Vista network as well as printers, that was waaaay back in may.

I'm not sure what to do/change at this step.  What do I change in the
samba (or samba.conf) file?

root at OpenWrt:~# cat /etc/config/samba

config samba
        option 'name'                   'openwrt'
        option 'workgroup'              'openwrt'
        option 'description'    'openwrt'
        option 'homes'                  '1'

config sambashare
        option 'name'                   'tmp'
        option 'path'                   '/tmp'
        option 'read_only'              'no'
        option 'guest_ok'               'no'
        option 'create_mask'    '0700'
        option 'dir_mask'               '0700'
        #option 'users'                 'abc'

My Windows workgroup is called "workgroup"

Thanks - Jim

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us