[Bloat] Advice for dual wifi home network

[Dave Taht]

On Thu, Mar 7, 2013 at 6:36 PM, Jonathan Morton <chromatix99 at gmail.com>wrote:

>
> On 8 Mar, 2013, at 1:22 am, Sandy McArthur wrote:
>
> > I'm looking to setup a home network with two APs connected by ethernet.
>  I think I understand the default network settings for use as a single
> cerowrt network but I'm struggling how to wrap my brain around how a second
> router should be configured so that the second access point isn't just
> another level of NAT deeper inside the first router.
> >
> > Internet ---- cerowrt A ---- cerowrt B
> >
> > Configuring the B router is what is confusing me.
>
> You will need four devices, if your modem is not itself a router:
>
> Modem  -----  Router (does NAT)
>               |    |
>              AP    AP   (both in bridge mode)
>
>  - Jonathan Morton
>

Bridging bad idea in modern age. Routing good. Just the two cero devices he
has is fine.,

Described in previous mail.

>
>
> _______________________________________________
> Bloat mailing list
> Bloat at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/bloat
>



-- 
Dave Täht

Fixing bufferbloat with cerowrt:
http://www.teklibre.com/cerowrt/subscribe.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20130307/6f084a97/attachment-0003.html>