[Bloat] AQM creeping into L2 equipment

[Toke Høiland-Jørgensen]

Dave Taht <dave.taht at gmail.com> writes:

> I imagine with the new tcp's pfifo_fast is going to be sub 8ms also.

Yeah, turns out I botched the qdisc setup (put it on the wrong interface
on one of the servers) for the case with no switch. So the ~6ms was with
pfifo_fast in one end.

Updated the original graphs for the host-to-host. Data capture files are
here: http://kau.toke.dk/experiments/cisco-switch/packet-captures/ -- no
idea why the client seems to capture three times as many packets as the
server. None of them seem to think they've dropped any (as per tcpdump
output).

Will add dumps from going through the switch in a bit...

> Is your hardware fast enough to run tcpdump -s 128 -w whatever.cap -i
> your interface during an entire rrul test without dropping packets?
> (on client and server)

Well, as above, tcpdump doesn't say anything about dropped packets; but
since the client dump is way bigger, perhaps the server-side does anyway?

-Toke
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 489 bytes
Desc: not available
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20140321/55183485/attachment-0001.sig>