[Bloat] DSLReports Speed Test has latency measurement built-in

[jb]

Your test used a mixture of Taiwan, Japan and Dallas Texas which were the
three best locations.
Ideally the test should concentrate less on Dallas/Taiwan, and more on
Japan, instead of picking randomly among them.

I'll be adjusting the strategy to be more optimal. Then it is just a matter
of adding servers.

Despite the non optimal choice, as I mentioned, it did test a near gigabit
connection at Sony so the servers are not really lacking, just minimising
the total of the latency especially for Windows clients.

16.83s  stream0 mbits=0.52 (16% of 64k buffer) Dallas, TX, USA 1sec=0.56 5%
16.83s  stream1 mbits=0.43 (13% of 64k buffer) Dallas, TX, USA 1sec=0.7 0%
16.83s  stream2 mbits=1.94 (61% of 64k buffer) Dallas, TX, USA 1sec=1.62 1%
16.83s  stream3 mbits=7.3 (39% of 64k buffer) Tokyo, Japan 1sec=8.77 3%
16.83s  stream4 mbits=3.46 (35% of 64k buffer) Changhua, Taiwan 1sec=5.23 2%
16.83s  stream5 mbits=1.36 (43% of 64k buffer) Dallas, TX, USA 1sec=1.85 1%
16.83s  stream6 mbits=0.78 (24% of 64k buffer) Dallas, TX, USA 1sec=1.39 0%
16.83s  stream7 mbits=1.62 (51% of 64k buffer) Dallas, TX, USA 1sec=0.83 1%
16.83s  stream8 mbits=0.67 (21% of 64k buffer) Dallas, TX, USA 1sec=0.65 0%
16.83s  stream9 mbits=8.64 (46% of 64k buffer) Tokyo, Japan 1sec=6.82 3%
16.83s  stream10 mbits=3.81 (38% of 64k buffer) Changhua, Taiwan 1sec=3.11
2%
16.83s  stream11 mbits=0.27 (8% of 64k buffer) Dallas, TX, USA 1sec=0.6 0%
16.83s  stream12 mbits=1.67 (17% of 64k buffer) Changhua, Taiwan 1sec=3.24
1%
16.83s  stream13 mbits=5.83 (31% of 64k buffer) Tokyo, Japan 1sec=6.04 3%
16.83s  stream14 mbits=3.17 (32% of 64k buffer) Changhua, Taiwan 1sec=3.42
1%
16.83s  stream15 mbits=3.46 (35% of 64k buffer) Changhua, Taiwan 1sec=2.75
2%
16.83s  stream16 mbits=1.19 (37% of 64k buffer) Dallas, TX, USA 1sec=0.72 0%
16.83s  stream17 mbits=6.07 (32% of 64k buffer) Tokyo, Japan 1sec=13.31 2%
16.83s  stream18 mbits=0.8 (25% of 64k buffer) Dallas, TX, USA 1sec=1.39 0%
16.83s  stream19 mbits=1.44 (45% of 64k buffer) Dallas, TX, USA 1sec=0.65 1%
16.83s  stream20 mbits=4.11 (42% of 64k buffer) Changhua, Taiwan 1sec=2.37
2%
16.83s  stream21 mbits=1.25 (39% of 64k buffer) Dallas, TX, USA 1sec=0.67 1%
16.83s  stream22 mbits=6.13 (33% of 64k buffer) Tokyo, Japan 1sec=6.75 3%
16.83s  stream23 mbits=4.12 (22% of 64k buffer) Tokyo, Japan 1sec=6.04 2%



On Sun, Apr 19, 2015 at 8:53 PM, dikshie <dikshie at gmail.com> wrote:

> On Sun, Apr 19, 2015 at 9:57 AM, Rich Brown <richb.hanover at gmail.com>
> wrote:
> > Folks,
> >
> > I am delighted to pass along the news that Justin has added latency
> measurements into the Speed Test at DSLReports.com.
> >
> > Go to: https://www.dslreports.com/speedtest and click the button for
> your Internet link. This controls the number of simultaneous connections
> that get established between your browser and the speedtest server. After
> you run the test, click the green "Results + Share" button to see detailed
> info. For the moment, you need to be logged in to see the latency results.
> There's a "register" link on each page.
> >
> > The speed test measures latency using websocket pings: Justin says that
> a zero-latency link can give 1000 Hz - faster than a full HTTP ping. I just
> ran a test and got 48 msec latency from DSLReports, while ping gstatic.com
> gave 38-40 msec, so they're pretty fast.
> >
> > You can leave feedback on this page -
> http://www.dslreports.com/forum/r29910594-FYI-for-general-feedback-on-the-new-speedtest
> - or wait 'til Justin creates a new Bufferbloat topic on the forums.
>
>
>
> here from JP:
> http://www.dslreports.com/speedtest/320711
>
> there are not many servers in JP.
> _______________________________________________
> Bloat mailing list
> Bloat at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/bloat
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20150419/dec0b2ab/attachment-0002.html>