[Bloat] delay-under-load really helps diagnose real world problems

[Simon Barber]

This is a great tool. Just ran another test from my cell, this time not 
selecting the 'desktop'  mode, and choosing 4G as my access method.  
Similar results to the last one.

http://www.dslreports.com/speedtest/359928

Perhaps on the mobile platforms you could include a button on the results 
page to show the latency graph, but not actually load it until the button 
is pressed.

Simon

Sent with AquaMail for Android
http://www.aqua-mail.com


On April 24, 2015 9:13:12 PM jb <justin at dslr.net> wrote:

> Apologies, it is sorted. Try now on mobile. There is a new box coloured
> purple!
>
> Multiple issues, main one being the Highcharts charting js plugin is quite
> heavy at 200kb, so I am opting to not use it for the results page on mobile
> at least not yet. Perhaps if one is on 4G I should not worry,.
>
> However now, either way, the response is displayed during the test (in the
> purple box) and also stored.
> So viewing past tests in desktop mode still shows everything.
>
>
> On Sat, Apr 25, 2015 at 12:56 PM, Simon Barber <simon at superduper.net> wrote:
>
> > I ran some tests from my cellphone - a Samsung Note 3. I had to select
> > 'request desktop site' as an option in the chrome browser, and not choose
> > '4G' as my connection type (I chose DSL), to get the latency measurement to
> > show up. The results are great though.
> >
> > http://www.dslreports.com/speedtest/355893
> >
> > Download bloat (buffer in the cell site) is bad, but not absolutely
> > horrible, at about 1.1 seconds. Upload direction is terrible - 5.8 seconds
> > by the end of the test, and would probably have been higher given a longer
> > test. I'm assuming that this buffer is in the modem in the handset, and is
> > likely an almost infinite buffer.
> >
> > Simon
> >
> >
> > On 4/24/2015 7:58 AM, Matthew Ford wrote:
> >
> >> On 23 Apr 2015, at 22:55, Bill Ver Steeg (versteb) <versteb at cisco.com>
> >>> wrote:
> >>>
> >>> So, hats off to Justin!
> >>>
> >> A big +1 to what Bill said from me. This tool is great and has already
> >> helped me improve my own home network setup.
> >>
> >> A colleague noted that selecting ‘Public WiFi’ as connection type results
> >> in no bloat measurements. Which connection types are bloat measurements
> >> enabled for? What’s the plan for the others?
> >>
> >> Mat
> >> _______________________________________________
> >> Bloat mailing list
> >> Bloat at lists.bufferbloat.net
> >> https://lists.bufferbloat.net/listinfo/bloat
> >>
> >
> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20150424/8b83a7a9/attachment-0003.html>