[Bloat] Initial tests with BBR in kernel 4.9

Eric Dumazet eric.dumazet at gmail.com
Wed Jan 25 18:33:21 EST 2017


On Thu, 2017-01-26 at 00:04 +0100, Hans-Kristian Bakke wrote:
> I can do that. I guess I should do the capture from tun1 as that is
> the place that the tcp-traffic is visible? My non-virtual nic is only
> seeing OpenVPN encapsulated UDP-traffic.
> 

But is FQ installed at the point TCP sockets are ?

You should give us "tc -s qdisc show xxx"  so that we can check if
pacing (throttling) actually happens.


> On 25 January 2017 at 23:48, Neal Cardwell <ncardwell at google.com>
> wrote:
>         On Wed, Jan 25, 2017 at 5:38 PM, Hans-Kristian Bakke
>         <hkbakke at gmail.com> wrote:
>                 Actually.. the 1-4 mbit/s results with fq sporadically
>                 appears again as I keep testing but it is most likely
>                 caused by all the unknowns between me an my
>                 testserver. But still, changing to pfifo_qdisc seems
>                 to normalize the throughput again with BBR, could this
>                 be one of those times where BBR and pacing actually is
>                 getting hurt for playing nice in some very variable
>                 bottleneck on the way?
>         
>         
>         Possibly. Would you be able to take a tcpdump trace of each
>         trial (headers only would be ideal), and post on a web site
>         somewhere a pcap trace for one of the slow trials?
>         
>         
>         For example:
>         
>         
>            tcpdump -n -w /tmp/out.pcap -s 120 -i eth0 -c 1000000 &
>         
>         
>         
>         thanks,
>         neal
>         
>         
>          
>                 
>                 On 25 January 2017 at 23:01, Neal Cardwell
>                 <ncardwell at google.com> wrote:
>                         On Wed, Jan 25, 2017 at 3:54 PM, Hans-Kristian
>                         Bakke <hkbakke at gmail.com> wrote:
>                                 Hi
>                                 
>                                 
>                                 Kernel 4.9 finally landed in Debian
>                                 testing so I could finally test BBR in
>                                 a real life environment that I have
>                                 struggled with getting any kind of
>                                 performance out of.
>                                 
>                                 
>                                 The challenge at hand is UDP based
>                                 OpenVPN through europe at around 35 ms
>                                 rtt to my VPN-provider with plenty of
>                                 available bandwith available in both
>                                 ends and everything completely unknown
>                                 in between. After tuning the
>                                 UDP-buffers up to make room for my 500
>                                 mbit/s symmetrical bandwith at 35 ms
>                                 the download part seemed to work
>                                 nicely at an unreliable 150 to 300
>                                 mbit/s, while the upload was stuck at
>                                 30 to 60 mbit/s. 
>                                 
>                                 
>                                 Just by activating BBR the bandwith
>                                 instantly shot up to around 150 mbit/s
>                                 using a fat tcp test to a public
>                                 iperf3 server located near my VPN exit
>                                 point in the Netherlands. Replace BBR
>                                 with qubic again and the performance
>                                 is once again all over the place
>                                 ranging from very bad to bad, but
>                                 never better than 1/3 of BBRs "steady
>                                 state". In other words "instant WIN!"
>                         
>                         
>                         Glad to hear it. Thanks for the test report!
>                          
>                                 However, seeing the requirement of fq
>                                 and pacing for BBR and noticing that I
>                                 am running pfifo_fast within a VM with
>                                 virtio NIC on a Proxmox VE host with
>                                 fq_codel on all physical interfaces, I
>                                 was surprised to see that it worked so
>                                 well.
>                                 I then replaced pfifo_fast with fq and
>                                 the performance went right down to
>                                 only 1-4 mbit/s from around 150
>                                 mbit/s. Removing the fq again regained
>                                 the performance at once.
>                                 
>                                 
>                                 I have got some questions to you guys
>                                 that know a lot more than me about
>                                 these things: 
>                                 1. Do fq (and fq_codel) even work
>                                 reliably in a VM? What is the best
>                                 choice for default qdisc to use in a
>                                 VM in general?
>                         
>                         
>                         Eric covered this one. We are not aware of
>                         specific issues with fq in VM environments.
>                         And  we have tested that fq works sufficiently
>                         well on Google Cloud VMs.
>                          
>                                 2. Why do BBR immediately "fix" all my
>                                 issues with upload through that
>                                 "unreliable" big BDP link with
>                                 pfifo_fast when fq pacing is a
>                                 requirement?
>                         
>                         
>                         For BBR, pacing is part of the design in order
>                         to make BBR more "gentle" in terms of the rate
>                         at which it sends, in order to put less
>                         pressure on buffers and keep packet loss
>                         lower. This is particularly important when a
>                         BBR flow is restarting from idle. In this case
>                         BBR starts with a full cwnd, and it counts on
>                         pacing to pace out the packets at the
>                         estimated bandwidth, so that the queue can
>                         stay relatively short and yet the pipe can be
>                         filled immediately.
>                         
>                         
>                         Running BBR without pacing makes BBR more
>                         aggressive, particularly in restarting from
>                         idle, but also in the steady state, where BBR
>                         tries to use pacing to keep the queue short.
>                         
>                         
>                         For bulk transfer tests with one flow, running
>                         BBR without pacing will likely cause higher
>                         queues and loss rates at the bottleneck, which
>                         may negatively impact other traffic sharing
>                         that bottleneck.
>                          
>                                 3. Could fq_codel on the physical host
>                                 be the reason that it still works?
>                         
>                         
>                         Nope, fq_codel does not implement pacing.
>                          
>                                 4. Do BBR _only_ work with fq pacing
>                                 or could fq_codel be used as a
>                                 replacement?
>                         
>                         
>                         Nope, BBR needs pacing to work correctly, and
>                         currently fq is the only Linux qdisc that
>                         implements pacing.
>                          
>                                 5. Is BBR perhaps modified to do the
>                                 right thing without having to change
>                                 the qdisc in the current kernel 4.9?
>                         
>                         
>                         Nope. Linux 4.9 contains the initial public
>                         release of BBR from September 2016. And there
>                         have been no code changes since then (just
>                         expanded comments).
>                         
>                         
>                         Thanks for the test report!
>                         
>                         
>                         neal
>                         
>                         
>                 
>                 
>         
>         
> 
> 
> _______________________________________________
> Bloat mailing list
> Bloat at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/bloat




More information about the Bloat mailing list