[Bloat] SQM Settings for Bonded DSL?

[Arie]

I have perfect results treating my bonded VDSL like a single connection, so
like you said, measure the unshaped speed, start a few % below.

On 21 June 2018 at 13:08, Rich Brown <richb.hanover at gmail.com> wrote:

> Hi folks,
>
> Our local DSL ISP (Consolidated Communications, Inc, formerly Fairpoint)
> recently installed a Smart/RG SR555ac (https://www.smartrg.com/sr555ac)
> bonded ADSL2 modem.
>
> I seem to remember earlier messages stating that the dual queues in the
> DSL modem screwed up (or, de-optimized) the SQM in the router.
>
> The web GUI does provide info on SNR, sync rates, etc. Any advice for SQM
> beyond the standard, "measure the no-SQM speed, then start at 5% below..."?
> Thanks.
>
> Rich
> _______________________________________________
> Bloat mailing list
> Bloat at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/bloat
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20180621/ca169205/attachment-0002.html>