[Bloat] About Setting Bandwidth limit with or without ethernet overhead?

Y intruder_tkyf at yahoo.fr
Wed Nov 7 16:48:30 EST 2018


Hi , Dave
Thank you for your reply.

I should show you tc-stab setting.

My connection is PPPoA via ethernet. PC connects ethernet directly.

####stab linklayer atm overhead -4

I add PPPoA overhead 10 + Ethernet overhead -14 = -4
But, settled Bandwith is 98% of link speed ( I mean this is
settled bandwidth without ethernet overhead).

I should shape more?

Thanks.

On Wed, 07 Nov 2018 11:28:47 -0800
Dave Taht <dave at taht.net> wrote:

> Y <intruder_tkyf at yahoo.fr> writes:
> 
> > Hi, I am Yutaka.
> >
> > I connect internet via ethenet.	
> > Shoud I set Bandwidth limit with or without ethernet overhead in any
> > qdiscs?
> > When I measured , It seems setting without ethernet overhead is
> > correct.  
> 
> It depends on your next hop's framing. If you are on ethernet going to
> ethernet, then you should set ethernet. If you are on ethernet,
> going through a cablemodem, set docsis. If you are on ethernet, going
> through dsl or something else, you set the framing appropriately.
> 
> Without setting the framing appropriately you can run into
> situations where your shaper can be 60% in accurate (dsl).
> 
> >
> > Thanks.
> > _______________________________________________
> > Bloat mailing list
> > Bloat at lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/bloat  




More information about the Bloat mailing list