[Bloat] [Starlink] [Rpm] Researchers Seeking Probe Volunteers in USA

Sebastian Moeller moeller0 at gmx.de
Fri Jan 13 02:33:27 EST 2023 

Hi RR,

Thanks for the detailed response below, since my point is somewhat orthogonal I opted for top-posting.
Let me take a step back here and rephrase, synchronising clocks within an acceptable range to be useful is not rocket science nor witchcraft. For measuring internet traffic 'millisecond' range seems acceptable, local networks can probably profit from finer time resolution. So I am not after e.g. clock synchronisation to participate in SDH/SONET. Heck in the toy project I am active in, we operate on load dependent delay deltas so we even ignore different time offsets and are tolerant to (mildly) different tickrates and clock skew, but it would certainly be nice to have some acceptable measure of UTC from endpoints to be able to interpret timestamps as 'absolute'. Mind you I am fine with them not being veridical absolute, but just good enough for my measurement purpose and I guess that should be within the range of the achievable. Heck, if all servers we query timestamps of would be NTP-'synchronized' and would follow the RFC recommendation to report timestamps in milliseconds past midnight UTC I would be happy.

Regards
        Sebsstian

On 12 January 2023 21:39:21 CET, Dick Roy <dickroy at alum.mit.edu> wrote:
>Hi Sebastian (et. al.),
>
> 
>
>[I'll comment up here instead of inline.]  
>
> 
>
>Let me start by saying that I have not been intimately involved with the
>IEEE 1588 effort (PTP), however I was involved in the 802.11 efforts along a
>similar vein, just adding the wireless first hop component and it's effects
>on PTP.  
>
> 
>
>What was apparent from the outset was that there was a lack of understanding
>what the terms "to synchronize" or "to be synchronized" actually mean.  It's
>not trivial . because we live in a (approximately, that's another story!)
>4-D space-time continuum where the Lorentz metric plays a critical role.
>Therein, simultaneity (aka "things happening at the same time") means the
>"distance" between two such events is zero and that distance is given by
>sqrt(x^2 + y^2 + z^2 - (ct)^2) and the "thing happening" can be the tick of
>a clock somewhere. Now since everything is relative (time with respect to
>what? / location with respect to where?) it's pretty easy to see that "if
>you don't know where you are, you can't know what time it is!" (English
>sailors of the 18th century knew this well!) Add to this the fact that if
>everything were stationary, nothing would happen (as Einstein said "Nothing
>happens until something moves!"), special relativity also pays a role.
>Clocks on GPS satellites run approx. 7usecs/day slower than those on earth
>due to their "speed" (8700 mph roughly)! Then add the consequence that
>without mass we wouldn't exist (in these forms at least:-)), and
>gravitational effects (aka General Relativity) come into play. Those turn
>out to make clocks on GPS satellites run 45usec/day faster than those on
>earth!  The net effect is that GPS clocks run about 38usec/day faster than
>clocks on earth.  So what does it mean to "synchronize to GPS"?  Point is:
>it's a non-trivial question with a very complicated answer.  The reason it
>is important to get all this right is that the "what that ties time and
>space together" is the speed of light and that turns out to be a
>"foot-per-nanosecond" in a vacuum (roughly 300m/usec).  This means if I am
>uncertain about my location to say 300 meters, then I also am not sure what
>time it is to a usec AND vice-versa! 
>
> 
>
>All that said, the simplest explanation of synchronization is probably: Two
>clocks are synchronized if, when they are brought (slowly) into physical
>proximity ("sat next to each other") in the same (quasi-)inertial frame and
>the same gravitational potential (not so obvious BTW . see the FYI below!),
>an observer of both would say "they are keeping time identically". Since
>this experiment is rarely possible, one can never be "sure" that his clock
>is synchronized to any other clock elsewhere. And what does it mean to say
>they "were synchronized" when brought together, but now they are not because
>they are now in different gravitational potentials! (FYI, there are land
>mine detectors being developed on this very principle! I know someone who
>actually worked on such a project!) 
>
> 
>
>This all gets even more complicated when dealing with large networks of
>networks in which the "speed of information transmission" can vary depending
>on the medium (cf. coaxial cables versus fiber versus microwave links!) In
>fact, the atmosphere is one of those media and variations therein result in
>the need for "GPS corrections" (cf. RTCM GPS correction messages, RTK, etc.)
>in order to get to sub-nsec/cm accuracy.  Point is if you have a set of
>nodes distributed across the country all with GPS and all "synchronized to
>GPS time", and a second identical set of nodes (with no GPS) instead
>connected with a network of cables and fiber links, all of different lengths
>and composition using different carrier frequencies (dielectric constants
>vary with frequency!) "synchronized" to some clock somewhere using NTP or
>PTP), the synchronization of the two sets will be different unless a common
>reference clock is used AND all the above effects are taken into account,
>and good luck with that! :-) 
>
> 
>
>In conclusion, if anyone tells you that clock synchronization in
>communication networks is simple ("Just use GPS!"), you should feel free to
>chuckle (under your breath if necessary:-)) 
>
> 
>
>Cheers,
>
> 
>
>RR
>
> 
>
> 
>
>  
>
> 
>
> 
>
> 
>
>-----Original Message-----
>From: Sebastian Moeller [mailto:moeller0 at gmx.de] 
>Sent: Thursday, January 12, 2023 12:23 AM
>To: Dick Roy
>Cc: Rodney W. Grimes; mike.reynolds at netforecast.com; libreqos; David P.
>Reed; Rpm; rjmcmahon; bloat
>Subject: Re: [Starlink] [Rpm] Researchers Seeking Probe Volunteers in USA
>
> 
>
>Hi RR,
>
> 
>
> 
>
>> On Jan 11, 2023, at 22:46, Dick Roy <dickroy at alum.mit.edu> wrote:
>
>> 
>
>>  
>
>>  
>
>> -----Original Message-----
>
>> From: Starlink [mailto:starlink-bounces at lists.bufferbloat.net] On Behalf
>Of Sebastian Moeller via Starlink
>
>> Sent: Wednesday, January 11, 2023 12:01 PM
>
>> To: Rodney W. Grimes
>
>> Cc: Dave Taht via Starlink; mike.reynolds at netforecast.com; libreqos; David
>P. Reed; Rpm; rjmcmahon; bloat
>
>> Subject: Re: [Starlink] [Rpm] Researchers Seeking Probe Volunteers in USA
>
>>  
>
>> Hi Rodney,
>
>>  
>
>>  
>
>>  
>
>>  
>
>> > On Jan 11, 2023, at 19:32, Rodney W. Grimes <starlink at gndrsh.dnsmgr.net>
>wrote:
>
>> > 
>
>> > Hello,
>
>> > 
>
>> >     Yall can call me crazy if you want.. but... see below [RWG]
>
>> >> Hi Bib,
>
>> >> 
>
>> >> 
>
>> >>> On Jan 9, 2023, at 20:13, rjmcmahon via Starlink
><starlink at lists.bufferbloat.net> wrote:
>
>> >>> 
>
>> >>> My biggest barrier is the lack of clock sync by the devices, i.e. very
>limited support for PTP in data centers and in end devices. This limits the
>ability to measure one way delays (OWD) and most assume that OWD is 1/2 and
>RTT which typically is a mistake. We know this intuitively with airplane
>flight times or even car commute times where the one way time is not 1/2 a
>round trip time. Google maps & directions provide a time estimate for the
>one way link. It doesn't compute a round trip and divide by two.
>
>> >>> 
>
>> >>> For those that can get clock sync working, the iperf 2 --trip-times
>options is useful.
>
>> >> 
>
>> >>    [SM] +1; and yet even with unsynchronized clocks one can try to
>measure how latency changes under load and that can be done per direction.
>Sure this is far inferior to real reliably measured OWDs, but if life/the
>internet deals you lemons....
>
>> > 
>
>> > [RWG] iperf2/iperf3, etc are already moving large amounts of data back
>and forth, for that matter any rate test, why not abuse some of that data
>and add the fundemental NTP clock sync data and bidirectionally pass each
>others concept of "current time".  IIRC (its been 25 years since I worked on
>NTP at this level) you *should* be able to get a fairly accurate clock delta
>between each end, and then use that info and time stamps in the data stream
>to compute OWD's.  You need to put 4 time stamps in the packet, and with
>that you can compute "offset".
>
>> [RR] For this to work at a reasonable level of accuracy, the timestamping
>circuits on both ends need to be deterministic and repeatable as I recall.
>Any uncertainty in that process adds to synchronization
>errors/uncertainties.
>
>>  
>
>>       [SM] Nice idea. I would guess that all timeslot based access
>technologies (so starlink, docsis, GPON, LTE?) all distribute "high quality
>time" carefully to the "modems", so maybe all that would be needed is to
>expose that high quality time to the LAN side of those modems, dressed up as
>NTP server?
>
>> [RR] It's not that simple!  Distributing "high-quality time", i.e.
>"synchronizing all clocks" does not solve the communication problem in
>synchronous slotted MAC/PHYs!
>
> 
>
>      [SM] I happily believe you, but the same idea of "time slot" needs to
>be shared by all nodes, no? So the clockss need to be reasonably similar
>rate, aka synchronized (see below).
>
> 
>
> 
>
>>  All the technologies you mentioned above are essentially P2P, not
>intended for broadcast.  Point is, there is a point controller (aka PoC)
>often called a base station (eNodeB, gNodeB, .) that actually "controls
>everything that is necessary to control" at the UE including time, frequency
>and sampling time offsets, and these are critical to get right if you want
>to communicate, and they are ALL subject to the laws of physics (cf. the
>speed of light)! Turns out that what is necessary for the system to function
>anywhere near capacity, is for all the clocks governing transmissions from
>the UEs to be "unsynchronized" such that all the UE transmissions arrive at
>the PoC at the same (prescribed) time!
>
> 
>
>      [SM] Fair enough. I would call clocks that are "in sync" albeit with
>individual offsets as synchronized, but I am a layman and that might sound
>offensively wrong to experts in the field. But even without the naming my
>point is that all systems that depend on some idea of shared time-base are
>halfway there of exposing that time to end users, by "translating it into an
>NTP time source at the modem.
>
> 
>
> 
>
>> For some technologies, in particular 5G!, these considerations are
>ESSENTIAL. Feel free to scour the 3GPP LTE 5G RLC and PHY specs if you don't
>believe me! J   
>
> 
>
>      [SM Far be it from me not to believe you, so thanks for the pointers.
>Yet, I still think that unless different nodes of a shared segment move at
>significantly different speeds, that there should be a common
>"tick-duration" for all clocks even if each clock runs at an offset... (I
>naively would try to implement something like that by trying to fully
>synchronize clocks and maintain a local offset value to convert from
>"absolute" time to "network" time, but likely because coming from the
>outside I am blissfully unaware of the detail challenges that need to be
>solved).
>
> 
>
>Regards & Thanks
>
>      Sebastian
>
> 
>
> 
>
>>  
>
>>  
>
>> > 
>
>> >> 
>
>> >> 
>
>> >>> 
>
>> >>> --trip-times
>
>> >>> enable the measurement of end to end write to read latencies (client
>and server clocks must be synchronized)
>
>> > [RWG] --clock-skew
>
>> >     enable the measurement of the wall clock difference between sender
>and receiver
>
>> > 
>
>> >> 
>
>> >>    [SM] Sweet!
>
>> >> 
>
>> >> Regards
>
>> >>    Sebastian
>
>> >> 
>
>> >>> 
>
>> >>> Bob
>
>> >>>> I have many kvetches about the new latency under load tests being
>
>> >>>> designed and distributed over the past year. I am delighted! that
>they
>
>> >>>> are happening, but most really need third party evaluation, and
>
>> >>>> calibration, and a solid explanation of what network pathologies they
>
>> >>>> do and don't cover. Also a RED team attitude towards them, as well as
>
>> >>>> thinking hard about what you are not measuring (operations research).
>
>> >>>> I actually rather love the new cloudflare speedtest, because it tests
>
>> >>>> a single TCP connection, rather than dozens, and at the same time
>folk
>
>> >>>> are complaining that it doesn't find the actual "speed!". yet... the
>
>> >>>> test itself more closely emulates a user experience than
>speedtest.net
>
>> >>>> does. I am personally pretty convinced that the fewer numbers of
>flows
>
>> >>>> that a web page opens improves the likelihood of a good user
>
>> >>>> experience, but lack data on it.
>
>> >>>> To try to tackle the evaluation and calibration part, I've reached
>out
>
>> >>>> to all the new test designers in the hope that we could get together
>
>> >>>> and produce a report of what each new test is actually doing. I've
>
>> >>>> tweeted, linked in, emailed, and spammed every measurement list I
>know
>
>> >>>> of, and only to some response, please reach out to other test
>designer
>
>> >>>> folks and have them join the rpm email list?
>
>> >>>> My principal kvetches in the new tests so far are:
>
>> >>>> 0) None of the tests last long enough.
>
>> >>>> Ideally there should be a mode where they at least run to "time of
>
>> >>>> first loss", or periodically, just run longer than the
>
>> >>>> industry-stupid^H^H^H^H^H^Hstandard 20 seconds. There be dragons
>
>> >>>> there! It's really bad science to optimize the internet for 20
>
>> >>>> seconds. It's like optimizing a car, to handle well, for just 20
>
>> >>>> seconds.
>
>> >>>> 1) Not testing up + down + ping at the same time
>
>> >>>> None of the new tests actually test the same thing that the infamous
>
>> >>>> rrul test does - all the others still test up, then down, and ping.
>It
>
>> >>>> was/remains my hope that the simpler parts of the flent test suite -
>
>> >>>> such as the tcp_up_squarewave tests, the rrul test, and the rtt_fair
>
>> >>>> tests would provide calibration to the test designers.
>
>> >>>> we've got zillions of flent results in the archive published here:
>
>> >>>> https://blog.cerowrt.org/post/found_in_flent/
>
>> >>>> ps. Misinformation about iperf 2 impacts my ability to do this.
>
>> >>> 
>
>> >>>> The new tests have all added up + ping and down + ping, but not up +
>
>> >>>> down + ping. Why??
>
>> >>>> The behaviors of what happens in that case are really non-intuitive,
>I
>
>> >>>> know, but... it's just one more phase to add to any one of those new
>
>> >>>> tests. I'd be deliriously happy if someone(s) new to the field
>
>> >>>> started doing that, even optionally, and boggled at how it defeated
>
>> >>>> their assumptions.
>
>> >>>> Among other things that would show...
>
>> >>>> It's the home router industry's dirty secret than darn few "gigabit"
>
>> >>>> home routers can actually forward in both directions at a gigabit.
>I'd
>
>> >>>> like to smash that perception thoroughly, but given our starting
>point
>
>> >>>> is a gigabit router was a "gigabit switch" - and historically been
>
>> >>>> something that couldn't even forward at 200Mbit - we have a long way
>
>> >>>> to go there.
>
>> >>>> Only in the past year have non-x86 home routers appeared that could
>
>> >>>> actually do a gbit in both directions.
>
>> >>>> 2) Few are actually testing within-stream latency
>
>> >>>> Apple's rpm project is making a stab in that direction. It looks
>
>> >>>> highly likely, that with a little more work, crusader and
>
>> >>>> go-responsiveness can finally start sampling the tcp RTT, loss and
>
>> >>>> markings, more directly. As for the rest... sampling TCP_INFO on
>
>> >>>> windows, and Linux, at least, always appeared simple to me, but I'm
>
>> >>>> discovering how hard it is by delving deep into the rust behind
>
>> >>>> crusader.
>
>> >>>> the goresponsiveness thing is also IMHO running WAY too many streams
>
>> >>>> at the same time, I guess motivated by an attempt to have the test
>
>> >>>> complete quickly?
>
>> >>>> B) To try and tackle the validation problem:ps. Misinformation about
>iperf 2 impacts my ability to do this.
>
>> >>> 
>
>> >>>> In the libreqos.io project we've established a testbed where tests
>can
>
>> >>>> be plunked through various ISP plan network emulations. It's here:
>
>> >>>> https://payne.taht.net (run bandwidth test for what's currently
>hooked
>
>> >>>> up)
>
>> >>>> We could rather use an AS number and at least a ipv4/24 and ipv6/48
>to
>
>> >>>> leverage with that, so I don't have to nat the various emulations.
>
>> >>>> (and funding, anyone got funding?) Or, as the code is GPLv2 licensed,
>
>> >>>> to see more test designers setup a testbed like this to calibrate
>
>> >>>> their own stuff.
>
>> >>>> Presently we're able to test:
>
>> >>>> flent
>
>> >>>> netperf
>
>> >>>> iperf2
>
>> >>>> iperf3
>
>> >>>> speedtest-cli
>
>> >>>> crusader
>
>> >>>> the broadband forum udp based test:
>
>> >>>> https://github.com/BroadbandForum/obudpst
>
>> >>>> trexx
>
>> >>>> There's also a virtual machine setup that we can remotely drive a web
>
>> >>>> browser from (but I didn't want to nat the results to the world) to
>
>> >>>> test other web services.
>
>> >>>> _______________________________________________
>
>> >>>> Rpm mailing list
>
>> >>>> Rpm at lists.bufferbloat.net
>
>> >>>> https://lists.bufferbloat.net/listinfo/rpm
>
>> >>> _______________________________________________
>
>> >>> Starlink mailing list
>
>> >>> Starlink at lists.bufferbloat.net
>
>> >>> https://lists.bufferbloat.net/listinfo/starlink
>
>> >> 
>
>> >> _______________________________________________
>
>> >> Starlink mailing list
>
>> >> Starlink at lists.bufferbloat.net
>
>> >> https://lists.bufferbloat.net/listinfo/starlink
>
>>  
>
>> _______________________________________________
>
>> Starlink mailing list
>
>> Starlink at lists.bufferbloat.net
>
>> https://lists.bufferbloat.net/listinfo/starlink
>

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20230113/304ad544/attachment-0001.html>

More information about the Bloat mailing list