Hi Dave,<br>

<br>

dhcp6c config file attached. My ISP use /48 prefixes. Basically I had to
 change 'enabled' to '1', set the interface to use for the client (ge00), set the interfaces to which prefixes should be assigned (loopback and 
se00 for now) and set sla_len to 16 for them (48 + 16 = 64).<br>

It looks like dhcp6c is able to get a prefix, but this prefix is not 
properly integrated with the rest of cerowrt. See the ifconfig.out 
attached - only the interfaces explicitly mentioned in the dhcp6c config
 file got proper ipv6 addresses (2406:*) eventually, the others are getting 2002:* 
global unicast addresses.<br>

Also, for some reason, dhcp6c refuses to assign ipv6 prefix to ge00 (if I 
change loopback to ge00 at the end of the config file, it won't start).<br>

Computers behind the router are also getting 2002:* addresses and work through 6-to-4. <br><br><br>Thanks,<br>Maxim<br><br><div class="gmail_quote">On 11 November 2011 01:17, Dave Taht <span dir="ltr"><<a href="mailto:dave.taht@gmail.com">dave.taht@gmail.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Dear Maxim:<br>
<br>
> Updated to smoketest10.<br>
> Those features are slightly tested now. After installing the necessary<br>
> packages, 3g and pppoe work, dhcp6c also seems to be OK, but requires some<br>
> messing with the /etc/config/dhcp6c.conf file.<br>
<br>
What sorts of 'messing about' were required? (please send conf file)<br>
<br>
How big a PD (/64? /60? /56? what?) do they delegate?<br>
<br>
With comcast starting to go live with their dual stack trial, they<br>
only will be delegating a /64 at first,<br>
<br>
<a href="http://blog.comcast.com/2011/11/ipv6-deployment-technology.html" target="_blank">http://blog.comcast.com/2011/11/ipv6-deployment-technology.html</a><br>
<br>
which blows up the routing-only concept in cerowrt when used with<br>
classic autonegotiated /64 ipv6 addressing. However I'd planned for<br>
that, in having AHCP available and babel be the default routing<br>
protocols. AHCP distributes /128s across all interfaces, and in<br>
combination with babel, lets you move transparently from wired to<br>
wireless domains and back again, which is very liberating and an<br>
advancement on the state of the art in home networking.<br>
<br>
so having hooks to AHCP and babel in there as alternative means to<br>
distribute /128s across all the routed interfaces would be exciting.<br>
If I knew what they were.<br>
<br>
Regardless of this particular hook, I'd like to make dhcpv6-pd<br>
enablement part of the next release, by default, rather than as an<br>
optional package.<br>
<span class="HOEnZb"><font color="#888888"><br>
--<br>
Dave Täht<br>
SKYPE: davetaht<br>
US Tel: <a href="tel:1-239-829-5608" value="+12398295608">1-239-829-5608</a><br>
FR Tel: 0638645374<br>
<a href="http://www.bufferbloat.net" target="_blank">http://www.bufferbloat.net</a><br>
</font></span></blockquote></div><br><br clear="all"><br>-- <br>Thanks,<br>Max<br><br>