<html><head></head><body>Dear Y.<br><br>Okay could you please post the full defaults.sh then as I assume this to configure sqm.<br>Also the output of<br>tc -s qdisc<br>tc -d qdisc<br>Would be interesting.<br><br>Best Regards<br><br><br><div class="gmail_quote">On November 7, 2018 4:06:52 PM PST, Y <intruder_tkyf@yahoo.fr> wrote:<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<pre class="k9mail">moeee :)<br><br>I don't use openwrt.<br>Maybe, so I cannot find /etc/config/sqm on my pc. <br>But I use sqmscript with below setting.<br><br>UPLINK=815 # 98% of linkspeed<br>DOWNLINK=11603 # 98% of linkspeed<br>SCRIPT=simple.qos<br>LINKLAYER=atm<br>OVERHEAD=-4<br>EECN=NOECN<br><br>Thanks.<br>Yutaka.<br><br><br>On Wed, 7 Nov 2018 15:21:24 -0800<br>Sebastian Moeller <moeller0@gmx.de> wrote:<br><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 1ex 0.8ex; border-left: 1px solid #729fcf; padding-left: 1ex;">Hi Y,<br><br>when you shape for an ATM link you absolutely nned to set the<br>linklayer to ATM. If you use openwrt why don't you post the contents<br>of "cat /etc/config/sqm"<br>here and we can go over it line by line?<br><br>Best Regards<br> Sebastian<br><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 1ex 0.8ex; border-left: 1px solid #ad7fa8; padding-left: 1ex;">On Nov 7, 2018, at 14:13, Y <intruder_tkyf@yahoo.fr> wrote:<br><br>I am sorry. Dave.<br><br>My actual speed with this setting , almost expected .<br>Around 90kbytes per second actual speed = 810kbit per second actual<br>setting speed * 48/53 considering atm connection. <br>This settled speed doesn't include ethernet framing.<br><br>Maybe , <br>Bandwidth = without ethernet overhead<br>tc-stab overhead = -14 <br>is correct.<br><br>Thank you .<br><br>On Thu, 8 Nov 2018 06:48:30 +0900<br>Y <intruder_tkyf@yahoo.fr> wrote:<br> <br><blockquote class="gmail_quote" style="margin: 0pt 0pt 1ex 0.8ex; border-left: 1px solid #8ae234; padding-left: 1ex;">Hi , Dave<br>Thank you for your reply.<br><br>I should show you tc-stab setting.<br><br>My connection is PPPoA via ethernet. PC connects ethernet directly.<br><br>####stab linklayer atm overhead -4<br><br>I add PPPoA overhead 10 + Ethernet overhead -14 = -4<br>But, settled Bandwith is 98% of link speed ( I mean this is<br>settled bandwidth without ethernet overhead).<br><br>I should shape more?<br><br>Thanks.<br><br>On Wed, 07 Nov 2018 11:28:47 -0800<br>Dave Taht <dave@taht.net> wrote:<br> <br><blockquote class="gmail_quote" style="margin: 0pt 0pt 1ex 0.8ex; border-left: 1px solid #fcaf3e; padding-left: 1ex;">Y <intruder_tkyf@yahoo.fr> writes:<br> <br><blockquote class="gmail_quote" style="margin: 0pt 0pt 1ex 0.8ex; border-left: 1px solid #e9b96e; padding-left: 1ex;">Hi, I am Yutaka.<br><br>I connect internet via ethenet. <br>Shoud I set Bandwidth limit with or without ethernet overhead in<br>any qdiscs?<br>When I measured , It seems setting without ethernet overhead is<br>correct. <br></blockquote><br>It depends on your next hop's framing. If you are on ethernet<br>going to ethernet, then you should set ethernet. If you are on<br>ethernet, going through a cablemodem, set docsis. If you are on<br>ethernet, going through dsl or something else, you set the framing<br>appropriately.<br><br>Without setting the framing appropriately you can run into<br>situations where your shaper can be 60% in accurate (dsl).<br> <br><blockquote class="gmail_quote" style="margin: 0pt 0pt 1ex 0.8ex; border-left: 1px solid #e9b96e; padding-left: 1ex;"><br>Thanks.<hr>Bloat mailing list<br>Bloat@lists.bufferbloat.net<br><a href="https://lists.bufferbloat.net/listinfo/bloat">https://lists.bufferbloat.net/listinfo/bloat</a> <br></blockquote></blockquote><br></blockquote><hr>Bloat mailing list<br>Bloat@lists.bufferbloat.net<br><a href="https://lists.bufferbloat.net/listinfo/bloat">https://lists.bufferbloat.net/listinfo/bloat</a> <br></blockquote><br></blockquote><br></pre></blockquote></div><br>-- <br>Sent from my Android device with K-9 Mail. Please excuse my brevity.</body></html>