[Cake] How to test Cake on TP-Link WDR3600

[Sebastian Moeller]

Hi Alec,

On Jul 25, 2015, at 17:45 , Alec Robertson <alecrobertson13 at gmail.com> wrote:

> Hello,
> 
> I’ve flashed the OpenWRT image for the TP-Link WDR3600 from 2015-06-23 (http://snapon.lab.bufferbloat.net/~cero3/lupin/ar71xx/) and it has installed correctly.
> 
> How do I go about setting it up for my UK TalkTalk Fibre connection (using a VDSL modem connected to the TP-Link router: the TP-Link router gets an IP address via DHCP).
> 
> My sincere apologies if any of this is really obvious and I’ve been silly and missed it.

	Maybe try luci-app-sqm and sqm scripts? 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 4alec.tar.gz
Type: application/x-gzip
Size: 12811 bytes
Desc: not available
URL: <https://lists.bufferbloat.net/pipermail/cake/attachments/20150725/164aca09/attachment-0002.bin>
-------------- next part --------------
Attached you will find the most recent files for sqm-scripts, just move all the files in the archive to the corresponding locations on your router and the select cake as qdisc and piece_of_cake.qos as script. (You might need a more recent luck-app-sqm, but first try what happens if you try the new scripts). After using the GUI to properly configure your interface you can always run either:
/etc/init.d/sqm stop
or 
/etc/init.d/sqm start
to stop and start sqm-scripts manually. Running:
tc -d qdisc
should give you some feedback whether things worked as you intended. If you want to tests this I am happy to help you along the way, just holler where things break ;).

Best Regards
	Sebastian


> 
> 
> —
> Alec Robertson
> _______________________________________________
> Cake mailing list
> Cake at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cake