[Cake] inbound cake or fq_codel shaping fails on cable on netflix reno

[Sebastian Moeller]

Hi Kevin, 

Maybe don't use the ptm keyword, but rather reduce the shaper rates to at most 98.46 percent of the sync rate...

On July 24, 2018 4:54:01 PM GMT+02:00, Kevin Darbyshire-Bryant <kevin at darbyshire-bryant.me.uk> wrote:
>
>
>> On 24 Jul 2018, at 14:51, Dave Taht <dave.taht at gmail.com> wrote:
>> 
>> Now that you can join the party, I note there IS a flent server in
>england with irtt on it.
>> 
>> flent-london.bufferbloat.net
>
>Ok, well if you’re desperately interested….. :-)
>
>Plot I did running to the london server, one shaped at 99% downstream,
>the other at 98%…. and I’ve decided to stick at 98% as a result - plot
>is a little bit hard to distinguish but I’d say there’s around 8ms avg
>less latency-ish between the two.  And an order of magnitude between
>using london v fremont :-)
>
>The upstream barely registers
>
># tc -s qdisc show dev ifb4eth0
>qdisc cake 801a: root refcnt 2 bandwidth 78400Kbit diffserv3
>dual-dsthost nat ingress split-gso rtt 100.0ms ptm overhead 26

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cake/attachments/20180724/c4ee74ff/attachment.html>