[Cake] Recommendations for using cake in complex setup (wireguard + vlan + bond)

[Toke Høiland-Jørgensen]

Alban <albeu at free.fr> writes:

> Hi everybody,
>
> I am setting a new router with a non trivial setup and I really like to
> get some recommendations on how to best use cake. First of all the
> router is using VLAN on top of 2 bonded gigabit Ethernet interface:
>
>                         +--> VLAN1 (LAN)
>  eth0 <--+              |
>          +---> bond0 <--+--> VLAN2 (WAN1)
>  eth1 <--+              |
>                         +--> VLAN3 (WAN2)
>
> The bond is using LACP, but mainly for redundancy and not for the
> increased bandwidth. Both WAN VLAN are going to ISP provided FritzBox
> connected to 50/10Mbit VDSL2 lines.

What are the physical interfaces connected to? How is the traffic
getting to the FritzBoxes?

-Toke