[dtaht/ceropackages-3.10] a4b171: sqm-scripts: quiet the hotplug script (supress deb...

[GitHub]

  Branch: refs/heads/master
  Home:   https://github.com/dtaht/ceropackages-3.10
  Commit: a4b171d32e146e886dbff91a8ecd881821627a6a
      https://github.com/dtaht/ceropackages-3.10/commit/a4b171d32e146e886dbff91a8ecd881821627a6a
  Author: Sebastian Moeller <moeller0 at gmx.de>
  Date:   2015-03-05 (Thu, 05 Mar 2015)

  Changed paths:
    M net/sqm-scripts/files/etc/hotplug.d/iface/11-sqm

  Log Message:
  -----------
  sqm-scripts: quiet the hotplug script (supress debugging output)

The hotplug script for sqm-scripts had debug logging enabled, since that
is not needed for normal use, this commit silences the hotplug script
again.

Signed-off-by: Sebastian Moeller <moeller0 at gmx.de>


  Commit: a9020bf6118f2a8b43ec9383cd547be5efd35c06
      https://github.com/dtaht/ceropackages-3.10/commit/a9020bf6118f2a8b43ec9383cd547be5efd35c06
  Author: Sebastian Moeller <moeller0 at gmx.de>
  Date:   2015-03-05 (Thu, 05 Mar 2015)

  Changed paths:
    M net/sqm-scripts/files/usr/lib/sqm/run.sh

  Log Message:
  -----------
  sqm-scripts: make run.sh ignore spurious incomplete hotplug ifups

During system start up pppoe devices seem to receice ifup events
before the interface actually exists. This commit makes sqm's
run.sh script test whether the sys files for an interface
exist before actually trying to start an SQM instance on an
interface. This seems to nicely avoid starting on an not
fully established pppoe interface and avoids a number of
error messages during startup.

Signed-off-by: Sebastian Moeller <moeller0 at gmx.de>


Compare: https://github.com/dtaht/ceropackages-3.10/compare/b5ff451caa0d...a9020bf6118f