[Cerowrt-devel] IPv6 doesn't work as well with 3.3.8-17

[Richard Brown]

More testing...

I can get sw10 to work (to hand out an IPv6 address), but my MacBook doesn't get an IPv6 address when plugged into se00 (the wired interface). I have appended the /etc/config/network file that I'm using. 

I get the same result if the last two lines are changed to:

	list adv_interface 'se00'
	list adv_interface 'sw10'

[To reprise, I'm trying to use the script at http://www.bufferbloat.net/projects/cerowrt/wiki/IPv6_Tunnel to configure all the HE.net tunnel parameters automatically. That script gives an error "command failed: Device or resource busy (-16)" after it handles sw00 and gw00, and then again after it does sw10 and gw10. I also get these errors when I "/etc/init.d/network restart" with the config file below.]

Any suggestions? Thanks.

Rich Brown
Hanover, NH USA

=======================================
root at OpenWrt:~# cat /etc/config/network 

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config interface 'se00'
	option ifname 'se00'
	option proto 'static'
	option ipaddr '172.30.42.1'
	option netmask '255.255.255.224'
	option ip6addr '2001:470:8a63:100::1/64'

config interface 'ge00'
	option ifname 'ge00'
	option proto 'dhcp'

config interface 'sw00'
	option type 'none'
	option proto 'static'
	option ipaddr '172.30.42.65'
	option netmask '255.255.255.224'
	option ip6addr '2001:470:8a63:300::1/64'

config interface 'sw10'
	option type 'none'
	option proto 'static'
	option ipaddr '172.30.42.97'
	option netmask '255.255.255.224'
	option ip6addr '2001:470:8a63:200::1/64'

config switch
	option name 'rtl8366s'
	option reset '1'
	option enable_vlan '0'
	option blinkrate '2'
	option max_length '3'

config switch_vlan
	option device 'rtl8366s'
	option vlan '1'
	option ports '0 1 2 3 5t'

config switch_port
	option device 'rtl8366s'
	option port '1'
	option led '6'

config switch_port
	option device 'rtl8366s'
	option port '2'
	option led '9'

config switch_port
	option device 'rtl8366s'
	option port '5'
	option led '2'

config interface 'gw00'
	option type 'none'
	option proto 'static'
	option ipaddr '172.30.42.129'
	option netmask '255.255.255.224'
	option ip6addr '2001:470:8a63:400::1/64'

config interface 'gw10'
	option type 'none'
	option proto 'static'
	option ipaddr '172.30.42.161'
	option netmask '255.255.255.224'
	option ip6addr '2001:470:8a63:500::1/64'

config interface 'gw01'
	option proto 'ahcp'
	option ip6addr '2001:470:8a63:600::1/64'

config interface 'gw11'
	option proto 'ahcp'
	option ip6addr '2001:470:8a63:700::1/64'

config interface 'henet'
	option proto '6in4'
	option peeraddr '209.51.161.14'
	option ip6addr '2001:470:1f06:64::2/64'
	option tunnelid 'dddddd'
	option username 'YOUR-USERNAME'
	option password 'YOUR-PASSWORD'
	option adv_subnet '1'
	option adv_interface 'se00'
	option adv_interface 'sw10'