[Cerowrt-devel] Cerowrt 3.3.8-10 is released

[Dave Taht]

Might have been the bug felix fixed in -11

Might also have corrupted the /etc/config/wireless and/or
/etc/config/network file too. if you ended up with a wlan0-1 in there
that would be it...

I too rarely use the gui interface.

On Thu, Jul 12, 2012 at 4:45 PM, Maciej Soltysiak <maciej at soltysiak.com> wrote:
> Hi,
>
> Just flashed WNDR3800 with 3.3.8-10 and I get a weird problem.
> After flashing it works fine, until I change radio0 and 1 wifi settings: set
> WPA2, set channel, etc.
> After save&apply, on a cilent PC I am able to see the networks on the list
> but it's not possible to connect.
> I believe the client associates with the AP, but it has an APIPA address.
> Happens to normal and guest interfaces too, even if I don't touch guest
> interfaces.
>
> I logged in over the wire to see if dhcpd was running and it was, but since
> I can't find logs in the usual place I will now fallback to different
> firmware.
>
> Could that be a known issue?
>
> Regards,
> Maciej
>
> On Wed, Jul 11, 2012 at 6:56 PM, Maciej Soltysiak <maciej at soltysiak.com>
> wrote:
>>
>> Hi Dave,
>>
>> Thanks for a good, lengthy update. I wish you pleasant time travelling.
>>
>> One question on ECN though.
>>
>>
>> On Tue, Jul 10, 2012 at 3:43 AM, Dave Taht <dave.taht at gmail.com> wrote:
>>>
>>> - ECN dropping - after several high level conversations with many
>>> people smarter than me, I decided that dropping ECN packets at a
>>> certain point made sense. So did everyone else. The "certain point"
>>> remains puzzling to all, and
>>> rather than continue to waste time on it in cero I decided to play
>>> with models instead, and frankly, hope that someone else comes up with
>>> some sane way to combine ECN and codel sojourn time.
>>
>> So if we're dropping ECN packets and not of trying to allow them through
>> to communicate congestion am I better of enabling ECN on clients on my
>> network or not?
>>
>> Regards,
>> Maciej
>
>



-- 
Dave Täht
http://www.bufferbloat.net/projects/cerowrt/wiki - "3.3.8-6 is out
with fq_codel!"