[Cerowrt-devel] 3.3rc5-1 is out
dave.taht at gmail.com
Thu Mar 1 08:24:36 PST 2012
I setup a test environment using 3.3rc5-1 for the crypto problem and
was unable to get it to recur.
I've put some more info on the dibbler bug on the related bug, and
confirmed there's a problem (that takes at least a few hours to occur)
(summary, if you aren't using dhcpv6, turn dibbler off. Easiest way to
do that is rename the /etc/dibbler/client.conf file to something else)
On Thu, Mar 1, 2012 at 3:48 PM, Dave Taht <dave.taht at gmail.com> wrote:
> Dibbler-client is on by default in this build.
> I would be very interested to know if dibbler's pd support actually
> works in a real environment, (the bugfix for the interface crash *did
> work for me* in testing distributing /64s and /56s)
> ...and if the new 100% of cpu bug (which only seems to happen the
> absence of a dhcp v6 server) can be reproduced.
> (I'd not seen it before because I'd always HAD a dhcpv6 server present
> when playing with dhcpv6)
> I note - at least at the moment - anyone trying 3.3rc5-1 without a
> dhcpv6 server present, should disable dibbler entirely.
> As things turn out...
> Tomas updated dibbler to 0.8.2 on me yesterday, incorporating the git
> patches I was testing and had proven to work, and tells me it compiles
> down much smaller with -Os than it used to. So I imagine that pushing
> that up to openwrt head is a good idea.
> The new syntax for restricting what interfaces get ipv6 addresses from
> dhcpv6-pd is:
> downlink-prefix-ifaces "se00" , "eth0", "wlan0", "etc"
> On Thu, Mar 1, 2012 at 3:30 PM, Dave Taht <dave.taht at gmail.com> wrote:
>> 3.3rc5-1 is out at:
>> This was the first time I've had a chance to try to actually deploy
>> cero as the main router in a production environment (esr's) in quite
>> some time. Enough problems cropped up for me to recommend against
>> doing that at this point, although I am writing this email through it.
>> I did get some good data on how FIOS works (short summary: it's *hard*
>> to stress out fios)
>> Kernel 3.3rc5 + 83 patches to get it closer to rc6
>> gpsd 3.4+ package (from git head, trying to fix a PPS problem)
>> bind9.9.0 (released version)
>> dibbler-client (git head, fixing a crash with multiple interfaces)
>> A couple bugs have crept in due to bitrot, some of which I've bug
>> reported. The most severe appears that I have a problem with
>> power-save and crypto at 2.4 ghz in this (trouble with an android
>> phone, and the like)
>> firewall: syntax has changed, rules notably re ipv6 have changed,
>> all kinds of problems with multiple interfaces
>> 6to4: distributing 6to4 addresses onto interfaces didn't work
>> ipv6: radvd doesn't always manage to distribute an address
>> (multicast? client side problems?) - usually crops up on more modern
>> wireless interfaces
>> ipv6: dibbler-client eats 100% of cpu after being idle overnight
>> ipv6: dibbler-client wants to 'own' radvd
>> bind9: needs allow-recursion
>> I'm pretty sure that most of these bugs have existed in prior releases, with the
>> exception of the wireless power save one... which was kind of hard to trigger.
>> Dave Täht
>> SKYPE: davetaht
>> US Tel: 1-239-829-5608
> Dave Täht
> SKYPE: davetaht
> US Tel: 1-239-829-5608
US Tel: 1-239-829-5608
More information about the Cerowrt-devel