[Cerowrt-devel] IPV6

[Fred Stratton]

You used ping, not ping6, from what you posted.

On 21/12/13 17:13, Jim Reisert AD1C wrote:
> On Wed, Dec 18, 2013 at 9:40 PM, Dave Taht <dave.taht at gmail.com> wrote:
>
>> The gui is broken on seeing the wan port. It does look like you got
>> dns via ipv6.
>>
>> do an
>>
>>   ip -6 addr show
> 2: se00: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
>      inet6 fe80::100d:7fff:fe64:c60c/64 scope link
>         valid_lft forever preferred_lft forever
>
> 3: ge00: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
>      inet6 fe80::120d:7fff:fe64:c60d/64 scope link
>         valid_lft forever preferred_lft forever
>
>> if you do see ipv6 addrs, hopefully dnsmasq is doing ipv6 dns queries
>> at the very least. Try also a ping6 of a ipv6 enabled website.
> root at cerowrt:~# ping comcast6.net
> PING comcast6.net (69.252.216.215): 56 data bytes
> --- comcast6.net ping statistics ---
> 6 packets transmitted, 0 packets received, 100% packet loss
>
> I can get to http://comcast6.net however.
>
>