[Cerowrt-devel] Fwd: Re: CeroWrt 3.10.24-8 badly bloated?
Fred Stratton
fredstratton at ydl.net
Fri Dec 27 19:46:12 PST 2013
On 28/12/13 03:45, Fred Stratton wrote:
> fq_codel, with the specified target, shows great promise. fq_codel
> used to be much worse, in that it was not possible to download files,
> say an iso of ubuntu 13.10, and watch streaming flash video. This now
> works. I shall also try nfq_codel with the 25ms egress target,
>
>
> On 28/12/13 01:14, Dave Taht wrote:
>>
>> I note that nfq codel (which is closer to sfq in outlook than fq
>> codel (more like drr)) might be better in fred's case. But I'd hope
>> for his bandwidth and workload (mostly movies) the larger target will
>> compensate for the problems he'd had. But I don't know so...
>>
>> In the interest of science...
>>
>> I would certainly like a few days subjective non benchmark testing vs
>> a vs pie from more people. Certainly I can "feel" a difference of fq
>> codel vs pie. (Either are massively better than current cable
>> modems) videoconferencing, telephony, movies, games, web browsing...
>>
>> Anybody else willing to spend a week on pie? It is what is mandated
>> to be in docsis 3.1 (probably with a 10ms target)
>>
>> On Dec 27, 2013 4:07 PM, "Sebastian Moeller" <moeller0 at gmx.de
>> <mailto:moeller0 at gmx.de>> wrote:
>>
>> Hi Fred,
>>
>>
>> On Dec 27, 2013, at 21:20 , Fred Stratton <fredstratton at imap.cc>
>> wrote:
>>
>> > I guessed input into Dangerous options was required, but was
>> unsure of the syntax. Quite how /etc/config/sqm is read is
>> another matter to be addressed over ssh.
>> >
>> > I shall paste all in one email response, for you to rearrange
>> at the other end. Both use simple.qos.
>> >
>> > With pie:
>> >
>> > tc -d qdisc
>> > qdisc fq_codel a: dev se00 root refcnt 2 limit 1000p flows 1024
>> quantum 1000 target 5.0ms interval 100.0ms ecn
>> > qdisc htb 1: dev ge00 root refcnt 2 r2q 10 default 12
>> direct_packets_stat 6 ver 3.17
>> > linklayer atm overhead 18 mtu 2047 tsize 128
>> > qdisc pie 110: dev ge00 parent 1:11 limit 1000p target 25000
>> tupdate 30000 alpha 2 beta 20
>> > qdisc pie 120: dev ge00 parent 1:12 limit 1000p target 25000
>> tupdate 30000 alpha 2 beta 20
>> > qdisc pie 130: dev ge00 parent 1:13 limit 1000p target 25000
>> tupdate 30000 alpha 2 beta 20
>> > qdisc ingress ffff: dev ge00 parent ffff:fff1 ----------------
>> > qdisc htb 1: dev ifb0 root refcnt 2 r2q 10 default 12
>> direct_packets_stat 0 ver 3.17
>> > linklayer atm overhead 18 mtu 2047 tsize 128
>> > qdisc pie 110: dev ifb0 parent 1:11 limit 1000p target 20000
>> tupdate 30000 alpha 2 beta 20 ecn
>> > qdisc pie 120: dev ifb0 parent 1:12 limit 1000p target 20000
>> tupdate 30000 alpha 2 beta 20 ecn
>> > qdisc pie 130: dev ifb0 parent 1:13 limit 1000p target 20000
>> tupdate 30000 alpha 2 beta 20 ecn
>> > qdisc mq 1: dev sw10 root
>> > qdisc fq_codel 10: dev sw10 parent 1:1 limit 800p flows 1024
>> quantum 500 target 10.0ms interval 100.0ms
>> > qdisc fq_codel 20: dev sw10 parent 1:2 limit 800p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 30: dev sw10 parent 1:3 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 40: dev sw10 parent 1:4 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms
>> > qdisc mq 1: dev sw00 root
>> > qdisc fq_codel 10: dev sw00 parent 1:1 limit 800p flows 1024
>> quantum 500 target 10.0ms interval 100.0ms
>> > qdisc fq_codel 20: dev sw00 parent 1:2 limit 800p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 30: dev sw00 parent 1:3 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 40: dev sw00 parent 1:4 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms
>> > qdisc mq 1: dev gw00 root
>> > qdisc fq_codel 10: dev gw00 parent 1:1 limit 800p flows 1024
>> quantum 500 target 10.0ms interval 100.0ms
>> > qdisc fq_codel 20: dev gw00 parent 1:2 limit 800p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 30: dev gw00 parent 1:3 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 40: dev gw00 parent 1:4 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms
>> > qdisc mq 1: dev gw10 root
>> > qdisc fq_codel 10: dev gw10 parent 1:1 limit 800p flows 1024
>> quantum 500 target 10.0ms interval 100.0ms
>> > qdisc fq_codel 20: dev gw10 parent 1:2 limit 800p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 30: dev gw10 parent 1:3 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 40: dev gw10 parent 1:4 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms
>> > qdisc fq_codel a: dev pppoe-ge00 root refcnt 2 limit 1000p
>> flows 1024 quantum 1000 target 5.0ms interval 100.0ms ecn
>> >
>> >
>> > tc class show dev ge00
>> > class htb 1:11 parent 1:1 leaf 110: prio 1 rate 128000bit ceil
>> 316000bit burst 1600b cburst 1599b
>> > class htb 1:1 root rate 950000bit ceil 950000bit burst 1599b
>> cburst 1599b
>> > class htb 1:10 parent 1:1 prio 0 rate 950000bit ceil 950000bit
>> burst 1599b cburst 1599b
>> > class htb 1:13 parent 1:1 leaf 130: prio 3 rate 158000bit ceil
>> 934000bit burst 1599b cburst 1599b
>> > class htb 1:12 parent 1:1 leaf 120: prio 2 rate 158000bit ceil
>> 934000bit burst 1599b cburst 1599b
>> >
>> > with fq_codel, and 25ms target:
>> >
>> > tc -d qdisc
>> > qdisc fq_codel a: dev se00 root refcnt 2 limit 1000p flows 1024
>> quantum 1000 target 5.0ms interval 100.0ms ecn
>> > qdisc htb 1: dev ge00 root refcnt 2 r2q 10 default 12
>> direct_packets_stat 9 ver 3.17
>> > linklayer atm overhead 18 mtu 2047 tsize 128
>> > qdisc fq_codel 110: dev ge00 parent 1:11 limit 1000p flows 1024
>> quantum 300 target 25.0ms interval 100.0ms
>> > qdisc fq_codel 120: dev ge00 parent 1:12 limit 1000p flows 1024
>> quantum 300 target 25.0ms interval 100.0ms
>> > qdisc fq_codel 130: dev ge00 parent 1:13 limit 1000p flows 1024
>> quantum 300 target 25.0ms interval 100.0ms
>>
>> Great, so this worked okay, all three fq_codels on ge00
>> (egress) have an interval of 25ms, just as the Doctor (aka, Dave)
>> ordered :). Does this help to get fq_codel subjectively judged
>> performance to be equal to pie?
>>
>> Best
>> Sebastian
>>
>>
>>
>> > qdisc ingress ffff: dev ge00 parent ffff:fff1 ----------------
>> > qdisc htb 1: dev ifb0 root refcnt 2 r2q 10 default 12
>> direct_packets_stat 0 ver 3.17
>> > linklayer atm overhead 18 mtu 2047 tsize 128
>> > qdisc fq_codel 110: dev ifb0 parent 1:11 limit 1000p flows 1024
>> quantum 500 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 120: dev ifb0 parent 1:12 limit 1000p flows 1024
>> quantum 1500 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 130: dev ifb0 parent 1:13 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc mq 1: dev sw00 root
>> > qdisc fq_codel 10: dev sw00 parent 1:1 limit 800p flows 1024
>> quantum 500 target 10.0ms interval 100.0ms
>> > qdisc fq_codel 20: dev sw00 parent 1:2 limit 800p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 30: dev sw00 parent 1:3 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 40: dev sw00 parent 1:4 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms
>> > qdisc mq 1: dev sw10 root
>> > qdisc fq_codel 10: dev sw10 parent 1:1 limit 800p flows 1024
>> quantum 500 target 10.0ms interval 100.0ms
>> > qdisc fq_codel 20: dev sw10 parent 1:2 limit 800p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 30: dev sw10 parent 1:3 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 40: dev sw10 parent 1:4 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms
>> > qdisc mq 1: dev gw00 root
>> > qdisc fq_codel 10: dev gw00 parent 1:1 limit 800p flows 1024
>> quantum 500 target 10.0ms interval 100.0ms
>> > qdisc fq_codel 20: dev gw00 parent 1:2 limit 800p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 30: dev gw00 parent 1:3 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 40: dev gw00 parent 1:4 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms
>> > qdisc mq 1: dev gw10 root
>> > qdisc fq_codel 10: dev gw10 parent 1:1 limit 800p flows 1024
>> quantum 500 target 10.0ms interval 100.0ms
>> > qdisc fq_codel 20: dev gw10 parent 1:2 limit 800p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 30: dev gw10 parent 1:3 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms ecn
>> > qdisc fq_codel 40: dev gw10 parent 1:4 limit 1000p flows 1024
>> quantum 300 target 5.0ms interval 100.0ms
>> > qdisc fq_codel a: dev pppoe-ge00 root refcnt 2 limit 1000p
>> flows 1024 quantum 1000 target 5.0ms interval 100.0ms ecn
>> >
>> >
>> > tc class show dev ge00
>> > class htb 1:11 parent 1:1 leaf 110: prio 1 rate 128000bit ceil
>> 316000bit burst 1600b cburst 1599b
>> > class htb 1:1 root rate 950000bit ceil 950000bit burst 1599b
>> cburst 1599b
>> > class htb 1:10 parent 1:1 prio 0 rate 950000bit ceil 950000bit
>> burst 1599b cburst 1599b
>> > class htb 1:13 parent 1:1 leaf 130: prio 3 rate 158000bit ceil
>> 934000bit burst 1599b cburst 1599b
>> > class htb 1:12 parent 1:1 leaf 120: prio 2 rate 158000bit ceil
>> 934000bit burst 1599b cburst 1599b
>> > class fq_codel 110:2c9 parent 110:
>> > class fq_codel 120:1a5 parent 120:
>> > class fq_codel 120:31f parent 120:
>> >
>> >
>> >
>> > On 27/12/13 19:49, Dave Taht wrote:
>> >>
>> >> Pie has a default latency target of 20ms, fq codel 5ms. (But
>> the fq code target matters less as the target only applies to
>> queue building flows)
>> >>
>> >> A packet takes 13ms to transit the device at 1mbit.
>> >>
>> >> There is a change to fq codel in this release that should make
>> fiddling with target a low speeds less needed. (But might have
>> other problems) Still a comparison at roughly the same target vs
>> a vs pie in your environment would be very interesting.
>> >>
>> >> I suggested 25ms as a test (as pie never makes 20ms anyway)
>> >>
>> >> I came close to inserting a simple formula to start increasing
>> the target below 4mbit in this release.
>> >>
>> >> On Dec 27, 2013 11:25 AM, "Sebastian Moeller" <moeller0 at gmx.de
>> <mailto:moeller0 at gmx.de>> wrote:
>> >> >
>> >> > Hi Fred,
>> >> >
>> >> > you could try to put "target 25ms" without the quotes into
>> the advanced egress options field in the "Queue Discipline" tab,
>> that is exposed after checking "Show Dangerous Configuration". I
>> would love to hear whether that worked or not (I am not able to
>> test anything myself). Maybe posting the output of "tc -d qdisc"
>> and "tc class show dev ge00" would help. Good luck…
>> >> >
>> >> >
>> >> > Best Regards
>> >> > Sebastian
>> >> >
>> >> >
>> >> > On Dec 27, 2013, at 20:20 , Fred Stratton
>> <fredstratton at imap.cc> wrote:
>> >> >
>> >> > > I have been using pie for approximately 3 weeks.
>> >> > >
>> >> > > You are correct, in that the outbound speed is about 800 -
>> 900 kb/s.
>> >> > >
>> >> > > I shall try what you suggest, but do not know how to
>> express the target of 25 ms as a configuration option.
>> >> > >
>> >> > >
>> >> > > On 27/12/13 19:15, Dave Taht wrote:
>> >> > >> Dear fred: are you sticking with pie? I was going to
>> suggest you try fq codel with a target 25ms on your outbound.
>> (You are at 800kbit or so as best I recall?)
>> >> > >>
>> >> > >> On Dec 27, 2013 11:10 AM, "Fred Stratton"
>> <fredstratton at imap.cc> wrote:
>> >> > >> I upgraded to 3.10.24-8 on 2013-12-23.
>> >> > >>
>> >> > >> I modified /etc/fixdaemons, adding
>> >> > >> /etc/init.d/sqm restart
>> >> > >>
>> >> > >> input the appropriate sqm settings, transcribed from aqm
>> >> > >>
>> >> > >> rebooted
>> >> > >>
>> >> > >> and the build works very well. For ADSL2+ here, it is the
>> best so far.
>> >> > >>
>> >> > >>
>> >> > >> On 27/12/13 18:55, Dave Taht wrote:
>> >> > >>> A race condition appears to have crept in...
>> >> > >>>
>> >> > >>> ---------- Forwarded message ----------
>> >> > >>> From: "Dave Taht" <dave.taht at gmail.com
>> <mailto:dave.taht at gmail.com>>
>> >> > >>> Date: Dec 27, 2013 10:47 AM
>> >> > >>> Subject: Re: [Cerowrt-devel] CeroWrt 3.10.24-8 badly
>> bloated?
>> >> > >>> To: "Richard E. Brown" <richb.hanover at gmail.com
>> <mailto:richb.hanover at gmail.com>>
>> >> > >>> Cc:
>> >> > >>>
>> >> > >>> Probably didn't start sqm properly
>> >> > >>>
>> >> > >>> Restart it by hand via /etc/init.d/sqm restart
>> >> > >>>
>> >> > >>> tc -s qdisc show dev ge00
>> >> > >>>
>> >> > >>> Should show htb and fq codel.
>> >> > >>>
>> >> > >>> On Dec 27, 2013 10:36 AM, "Rich Brown"
>> <richb.hanover at gmail.com <mailto:richb.hanover at gmail.com>> wrote:
>> >> > >>> So I screwed up my courage and replaced my 3.10.18-?
>> firmware in my primary router with 3.10.24-8. That version had
>> worked well as a secondary, so I figured, What the heck… Let’s
>> give it try.
>> >> > >>>
>> >> > >>> The result was not pretty. I set my link speeds in the
>> SQM page, chose the defaults for the Queue Discipline tab, and
>> link layer to ATM with no additional overhead for my DSL link.
>> >> > >>>
>> >> > >>> Ping times to google are normally ~51-54 msec. But when
>> I fired up speedtest.net <http://speedtest.net>, they jumped to
>> 1500-2500 msec. Is there something I should look at before
>> reverting? Thanks.
>> >> > >>>
>> >> > >>> Rich
>> >> > >>> _______________________________________________
>> >> > >>> Cerowrt-devel mailing list
>> >> > >>> Cerowrt-devel at lists.bufferbloat.net
>> <mailto:Cerowrt-devel at lists.bufferbloat.net>
>> >> > >>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> >> > >>>
>> >> > >>>
>> >> > >>> _______________________________________________
>> >> > >>> Cerowrt-devel mailing list
>> >> > >>>
>> >> > >>> Cerowrt-devel at lists.bufferbloat.net
>> <mailto:Cerowrt-devel at lists.bufferbloat.net>
>> >> > >>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> >> > >>
>> >> > >
>> >> > > _______________________________________________
>> >> > > Cerowrt-devel mailing list
>> >> > > Cerowrt-devel at lists.bufferbloat.net
>> <mailto:Cerowrt-devel at lists.bufferbloat.net>
>> >> > > https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> >> >
>> >
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20131228/2e63cd1c/attachment-0001.html>
More information about the Cerowrt-devel
mailing list