[Cerowrt-devel] collecting some data?

[Dave Taht]

to shorten the painful duration of the test, you can tell the chrome
benchmark merely to repeat 3 times each rather than 10.

On Mon, Feb 25, 2013 at 3:13 PM, Dave Taht <dave.taht at gmail.com> wrote:

> I have been collecting statistics on the behavior of the 3.7.5-2 version
> of cerowrt, and perhaps y'all out there can help. I've been doing four
> repeatable tests.
>
> I feed the attached file into the chrome web page benchmark and run it 4
> times:
>
> 1) No other load on the system
> 2) while running a single up and single down netperf stream to icei.org(on the east coast)
> 3) then while still loaded, after turning on simple_qos.sh, set for ~85%
> of the rated up/down bandwidth...
> 4) then killing the load, and keeping simple_qos enabled.
>
> I export each detailed (you have to select it) .csv output from that
> benchmark to a file.
>
> I do it against a bidirectional stream - one each of
>
> netperf -l 6000 -4 -H icei.org -t TCP_MAERTS &
> netperf -l 6000 -4 -H icei.org -t TCP_STREAM &
>
> (if you have ipv6, more power to you, kill the -4. )
>
> then starting the web tests 10-20 seconds later. It's interesting to watch
> cero's bandwidth graphs while doing this.
>
> There are netperf servers setup on the east (icei.org) and west coast (
> snapon.lab.bufferbloat.net) and a few other places. It would be sane to
> setup your own someplace you control (from netperf's svn compiled with
> --enable-demo), as it helps to have a shorter RTT to truly load up the
> link. You can also run the rrul test (preferably for 5 minutes or more
> because this test idea KILLs web page load times) to get a heavier load and
> more graphs.
>
> If you are up to trying this test series, please let me know, send along
> the details of your setup, and the 4 csv files, and perhaps your data will
> show up in an upcoming paper.
>
> The chrome web page benchmark can be had at:
>
>
> https://chrome.google.com/webstore/detail/page-benchmarker/channimfdomahekjcahlbpccbgaopjll?hl=en
>
> And requires you fire off chrome with --enable-benchmarking
>
> You can use the version of netperf on cerowrt to generate the load if you
> like, but rrul doesn't run on that. Latest version of rrul is at
> https://github.com/tohojo/netperf-wrapper
>
> --
> Dave Täht
>
> Fixing bufferbloat with cerowrt:
> http://www.teklibre.com/cerowrt/subscribe.html
>



-- 
Dave Täht

Fixing bufferbloat with cerowrt:
http://www.teklibre.com/cerowrt/subscribe.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20130225/2e818f83/attachment.html>