[Cerowrt-devel] collecting some data?

[Dave Taht]

On Mon, Feb 25, 2013 at 3:39 PM, Maciej Soltysiak <maciej at soltysiak.com>wrote:

> On Mon, Feb 25, 2013 at 9:13 PM, Dave Taht <dave.taht at gmail.com> wrote:
>
>> I have been collecting statistics on the behavior of the 3.7.5-2 version
>> of cerowrt, and perhaps y'all out there can help. I've been doing four
>> repeatable tests.
>>
>> I feed the attached file into the chrome web page benchmark and run it 4
>> times:
>>
>> 1) No other load on the system
>> 2) while running a single up and single down netperf stream to icei.org(on the east coast)
>> 3) then while still loaded, after turning on simple_qos.sh, set for ~85%
>> of the rated up/down bandwidth...
>> 4) then killing the load, and keeping simple_qos enabled.
>>
> Is that good if I run the chrome benchmark from a win7 laptop on 802.11n
> wifi, while netperfs are going from the wndr3800?
>

sure.

So long as the circumstances are documented, all data is good. (well, a
start!) I note it would be helpful to also collect the ping rtt to the
netperf server you are using....


>
> Regards,
> Maciej
>



-- 
Dave Täht

Fixing bufferbloat with cerowrt:
http://www.teklibre.com/cerowrt/subscribe.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20130225/08004a6d/attachment-0001.html>