[Cerowrt-devel] collecting some data?

Maciej Soltysiak maciej at soltysiak.com
Mon Feb 25 15:40:53 EST 2013

On Mon, Feb 25, 2013 at 9:39 PM, Maciej Soltysiak <maciej at soltysiak.com>wrote:

> On Mon, Feb 25, 2013 at 9:13 PM, Dave Taht <dave.taht at gmail.com> wrote:
>> I have been collecting statistics on the behavior of the 3.7.5-2 version
>> of cerowrt, and perhaps y'all out there can help. I've been doing four
>> repeatable tests.
>> I feed the attached file into the chrome web page benchmark and run it 4
>> times:
>> 1) No other load on the system
>> 2) while running a single up and single down netperf stream to icei.org(on the east coast)
>> 3) then while still loaded, after turning on simple_qos.sh, set for ~85%
>> of the rated up/down bandwidth...
>> 4) then killing the load, and keeping simple_qos enabled.
> Is that good if I run the chrome benchmark from a win7 laptop on 802.11n
> wifi, while netperfs are going from the wndr3800?
Forgot to mention my win7 TCP setup is:
netsh interface>tcp show global
Querying active state...

TCP Global Parameters
Receive-Side Scaling State          : enabled
Chimney Offload State               : automatic
NetDMA State                        : enabled
Direct Cache Acess (DCA)            : disabled
Receive Window Auto-Tuning Level    : normal
Add-On Congestion Control Provider  : none
ECN Capability                      : enabled
RFC 1323 Timestamps                 : disabled

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20130225/148612c2/attachment-0002.html>

More information about the Cerowrt-devel mailing list