[Cerowrt-devel] cerowrt-3.7.3-2 released

[Dave Taht]

And is at:

http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.7.3-2

+ resync with openwrt
+ uftp4 alpha
+ quagga update
+ Hopefully the last ipv6 instruction traps killed (thx ketan and robert!)
- I see rngd eating a ton of cpu on a given transfer. I'd been meaning to
look at the quality of the new entropy stuff for ages, and have long hoped
to be rid of that daemon

After we do a bit more testing I'll tag and push the source to this
version, and then get cracking on higher layers in the stack again.

A bit about uftp4 support. My intent with getting uftp into cerowrt 18
months ago was to have an easy multicast test, which would let someone (for
example) set a rate of 1Mbit and observe what happens to a wireless
network, observe packet loss at various distances from the AP, etc, as well
as get a grip on the timing delays induced by the power save mode in wifi
(basically storing all multicast content and broadcasting it as "content
after beacon", (CAP, also known colloquially as "crap after beacon"))...

Anyway, while I was thinking that as my basic use case in this project...

Dennis Bush was actually off making a new version do more useful things. We
got to talking last week... I've tried the ipv4 support and it's nifty.
Ipv6 didn't work but perhaps my x86 build is bad.

-- 
Dave Täht

Fixing bufferbloat with cerowrt:
http://www.teklibre.com/cerowrt/subscribe.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20130121/a84a16dd/attachment-0002.html>