[Cerowrt-devel] CeroWrt 3.10.18-1 Field Report

[David Personette]

Also, while I haven't tested this. After reboots I got an IP a good bit
faster than previous builds (IE without the long timeout in fixdaemons),
it's possible that the dnsmasq (at least) startup issue is fixed in
3.10.18...

-- 
David P.


On Thu, Nov 14, 2013 at 8:56 PM, Richard E. Brown
<richb.hanover at gmail.com>wrote:

> Update on my field report:
>
> I reflashed from 3.7.5-2 to 3.10.18-1 using sysupgrade via the web GUI. I
> did *not* keep settings.
>
> After letting the router restart and setting up assorted parameters, it
> seems completely fine. It feels snappier than 3.7.5-2, but I have no
> objective measurements of this. I did watch ping times during a heavy-ish
> download, and they hardly changed.
>
> PPPoE comes up as desired on boot (in my earlier experiment with the
> 3.7.5-2 settings kept around, it didn’t)
>
> mDNS works as desired across interfaces/subnets of this router.
>
> I’m feeling pretty cocky, so I installed 3.10.18-1 as my primary router.
> But as my father used to remind me, "Pride cometh before a fall.” So I’m
> keeping the 3.7.5-2 binary handy.
>
> Good work, everyone!
>
> Rich
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20131114/80687d16/attachment-0002.html>