[Cerowrt-devel] Upper routing throughput limit

[William Katsak]

Sorry to wake this thread up again. It does indeed seem that the 3800 is 
having trouble routing at my line speed.

I was considering doing a pfSense box, but it doesn't seem that 
Bufferbloat has been much of a consideration yet over there. There is a 
version of Codel, but the QoS would have to be set up manually.

I've Googled this Ubiquiti Edgerouter Lite, and I am intrigued. I don't 
see many details on Ubiquiti's site about the QoS though. Is this device 
as good at beating bloat as Cero? Would mating one of these with a 3800 
(for Wifi only) be a good bet?

Thanks,
-Bill


On 07/10/2014 11:01 AM, Aaron Wood wrote:
> It depends on the aqm rules that are configured.  In the base setup, it
> struggles at 50Mbps.  But that can be increased by switching from the
> simple.qos script to simplest.qos (I'm not sure where the limit is with
> the simplest.qos script.
>
> I know that Dave Taht has been working with some other platforms.  The
> Ubiquity EdgeRouter Lite may be able to hit 100Mbps, but it doesn't run
> CeroWRT itself, it just supports similar configuration.
>
> -Aaron
>
>
> On Thu, Jul 10, 2014 at 7:49 AM, William Katsak <wkatsak at gmail.com
> <mailto:wkatsak at gmail.com>> wrote:
>
>     Hello,
>
>     Does anyone have a good sense of the most throughput our 3800s with
>     Cero can push through the WAN interface? Are we good to 100 mbps? 1gbps?
>
>     Thanks,
>     Bill Katsak
>     _________________________________________________
>     Cerowrt-devel mailing list
>     Cerowrt-devel at lists.__bufferbloat.net
>     <mailto:Cerowrt-devel at lists.bufferbloat.net>
>     https://lists.bufferbloat.net/__listinfo/cerowrt-devel
>     <https://lists.bufferbloat.net/listinfo/cerowrt-devel>
>
>