[Cerowrt-devel] IPV6 success on 3.10.28-14 with 6to4 tunnel and 6relayd

[Dave Taht]

On Mon, Feb 24, 2014 at 12:22 AM, Steven Barth <steven at midlink.org> wrote:
> Normally it should work as soon as the 2 conditions: router has any default
> route and interface has a public prefix are satisfied. Can't see anything
> obviously wrong here. Hmm will have a look later again.

Data point from last night: I get correct RAs (with a default route)
on the sw00 interface. Not on the se00 interface.

There is no difference in configuration between the two interfaces, so
perhaps there's an
off-by-one or similar in odhcp still.


-- 
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html