[Cerowrt-devel] just when I thought it was safe to do a release

Dave Taht dave.taht at gmail.com
Wed Feb 19 11:29:12 EST 2014

On Wed, Feb 19, 2014 at 11:11 AM, David Personette <dperson at gmail.com> wrote:
> I installed 3.10.28-12, and other than some missing packages (bash and curl

Heh. What do you guys do, have a cron job polling for changes to the build dir?

I was going to sit on that and put out a more polished version sometime in
the next couple days.

> were what I noticed, and pulled from the previous version

I killed some big packages while trying to get a new build done faster.

I'll sort through the missing ones and add them back in. (I also just
added in squid, per request). Got a big build box donated to use
again, post disaster.

Does anyone care about cups? (printing?) It was one of those things that
just barely works in the first place due to memory constraints and a PITA
and I haven't shipped it in a while. Most printers are network capable
these days, and what I tend to use the usb port for is odd devices
and gps and the like. I'd like to have support for a 3g modem or two...

Two concerns of mine are that I killed off udev, which used to manage
hotplugging. I'd like to know what, if anything, people are using the usb
for, so as to be able to make sure losing udev doesn't break that...

> comcast/3.10.28-4). It's working great for me. Throughput on WiFi from my
> laptap to wired server is up, from 7-9MB to 10-12MB. Thank you.

I still think there is some tuning to be done on a rrul load, but we had
to get the last of the instruction traps out of the way first. As of
this morning
so far as I know, the "last" ones are gone, but I don't want to jinx it...

Did you try ipv6? Default routes are not quite working for me in
a couple scenarios.

> --
> David P.
> On Tue, Feb 18, 2014 at 5:49 PM, Dave Taht <dave.taht at gmail.com> wrote:
>> ok, so all the bits flying in loose formation have been rebased on top of
>> openwrt head, and I've submitted the last remaining differences (besides
>> SQM) up to openwrt-devel. They immediately took one...
>> I also went poking through current 3.14rc kernels to find bugs fixed there
>> but
>> not in stable 3.10. Found two more I think. (one elsewhere in the flow
>> hash that I had
>> just submitted upstream, sigh). Tried to backport sch_fq and sch_hhf,
>> failed,
>> gave up on tracking pie further.
>> So I got a new build going, including dnsmasq with dnssec, tested the
>> components,
>> and was ready to release...
>> ... when a whole boatload of other stuff landed. Doing a new build now...
>> and taking the rest of the day off.
>> --
>> Dave Täht
>> Fixing bufferbloat with cerowrt:
>> http://www.teklibre.com/cerowrt/subscribe.html
>> _______________________________________________
>> Cerowrt-devel mailing list
>> Cerowrt-devel at lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/cerowrt-devel

Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html

More information about the Cerowrt-devel mailing list