[Cerowrt-devel] just when I thought it was safe to do a release

[Sebastian Moeller]

Hi Dave,


On Feb 19, 2014, at 21:43 , Dave Taht <dave.taht at gmail.com> wrote:

> don't use 3.10.28-12 with the usb stick. Found a bug with codepoints.
> Building 3.10.28-14 now.

	Ah, okay, will wait for -14..

best regards
	Sebastian

> 
> 
> 
> On Wed, Feb 19, 2014 at 3:32 PM, Sebastian Moeller <moeller0 at gmx.de> wrote:
>> HI Dave,
>> 
>> 
>> On Feb 19, 2014, at 17:29 , Dave Taht <dave.taht at gmail.com> wrote:
>> 
>>> On Wed, Feb 19, 2014 at 11:11 AM, David Personette <dperson at gmail.com> wrote:
>>>> I installed 3.10.28-12, and other than some missing packages (bash and curl
>>> 
>>> Heh. What do you guys do, have a cron job polling for changes to the build dir?
>>> :)
>>> 
>>> I was going to sit on that and put out a more polished version sometime in
>>> the next couple days.
>>> 
>>>> were what I noticed, and pulled from the previous version
>>> 
>>> I killed some big packages while trying to get a new build done faster.
>>> 
>>> I'll sort through the missing ones and add them back in. (I also just
>>> added in squid, per request). Got a big build box donated to use
>>> again, post disaster.
>>> 
>>> Does anyone care about cups? (printing?) It was one of those things that
>>> just barely works in the first place due to memory constraints and a PITA
>>> and I haven't shipped it in a while. Most printers are network capable
>>> these days, and what I tend to use the usb port for is odd devices
>>> and gps and the like. I'd like to have support for a 3g modem or two...
>>> 
>>> Two concerns of mine are that I killed off udev, which used to manage
>>> hotplugging. I'd like to know what, if anything, people are using the usb
>>> for, so as to be able to make sure losing udev doesn't break that...
>> 
>>        On my wnder3700v2m I only use the USB to mount a USB stick, for a large persistent /home directory (for cerowrt images mainly, and persistent vnstat data so I can monitor consumed data volume per month) and a swap partition (under the theory that I rather have things slow to molasses while going though paging-purgatory compared to have the rout go belly-up). I have not tested 3.10.20-12 yet, but will holler if mounting the usb stick does not work without udev (but I assume it does not care too much about udev....)
>> 
>>> 
>>>> comcast/3.10.28-4). It's working great for me. Throughput on WiFi from my
>>>> laptap to wired server is up, from 7-9MB to 10-12MB. Thank you.
>>> 
>>> I still think there is some tuning to be done on a rrul load, but we had
>>> to get the last of the instruction traps out of the way first. As of
>>> this morning
>>> so far as I know, the "last" ones are gone, but I don't want to jinx it...
>> 
>>        Great, so that will be in the next non-release then ;) ?
>> 
>> Best Regards
>>        Sebastian
>> 
>>> 
>>> Did you try ipv6? Default routes are not quite working for me in
>>> a couple scenarios.
>>> 
>>>> --
>>>> David P.
>>>> 
>>>> 
>>>> On Tue, Feb 18, 2014 at 5:49 PM, Dave Taht <dave.taht at gmail.com> wrote:
>>>>> 
>>>>> ok, so all the bits flying in loose formation have been rebased on top of
>>>>> openwrt head, and I've submitted the last remaining differences (besides
>>>>> SQM) up to openwrt-devel. They immediately took one...
>>>>> 
>>>>> I also went poking through current 3.14rc kernels to find bugs fixed there
>>>>> but
>>>>> not in stable 3.10. Found two more I think. (one elsewhere in the flow
>>>>> hash that I had
>>>>> just submitted upstream, sigh). Tried to backport sch_fq and sch_hhf,
>>>>> failed,
>>>>> gave up on tracking pie further.
>>>>> 
>>>>> So I got a new build going, including dnsmasq with dnssec, tested the
>>>>> components,
>>>>> and was ready to release...
>>>>> 
>>>>> ... when a whole boatload of other stuff landed. Doing a new build now...
>>>>> 
>>>>> and taking the rest of the day off.
>>>>> 
>>>>> 
>>>>> --
>>>>> Dave Täht
>>>>> 
>>>>> Fixing bufferbloat with cerowrt:
>>>>> http://www.teklibre.com/cerowrt/subscribe.html
>>>>> _______________________________________________
>>>>> Cerowrt-devel mailing list
>>>>> Cerowrt-devel at lists.bufferbloat.net
>>>>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>>> 
>>>> 
>>> 
>>> 
>>> 
>>> --
>>> Dave Täht
>>> 
>>> Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html
>>> _______________________________________________
>>> Cerowrt-devel mailing list
>>> Cerowrt-devel at lists.bufferbloat.net
>>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> 
> 
> 
> 
> -- 
> Dave Täht
> 
> Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html