[Cerowrt-devel] Perfection vs. Good Enough

David Lang david at lang.hm
Sun Jan 12 16:10:17 PST 2014


On Sat, 11 Jan 2014, Sebastian Moeller wrote:

>>> Compared to the orders of magnitude we already get from fq codel, the sum benefit
>>> of these [Link Layer Adaptation] fixes is in the very small percentage points.
>
> 	I do not agree with this sentiment, as I understood Dave was talking 
> about different modifications to fq_codel (nfq_codel and efq_codel), this was 
> not about the link layer; for an ATM link if you get the link layer wrong the 
> shaper does at best work stochastically; and if the shaper does not work well 
> we are back at square one: badly managed buffers out of our control filling up 
> causing delays worth seconds. So unless you shape down to ~50% of link rate, 
> you will get at least temporary buffer bloat on an ATM link, unless you take 
> all the ATM peculiarities into account (basically what link layer ATM is 
> doing).

the question boils down to

compared to stock firmware,

how much of a beneifit is openwrt trunk (and how risky)
how much of a benefit is cerowrt without the link-level tuning

how much additional benefit do we expect to get from the added work.

What we have now is a huge step forward compared to stock firmware, a 
significant portion of this benefit has been pushed upstream to openwrt.

but right now there is a lot of work to make things perfect, and as a result, 
people are stuck using stock firmware or openwrt releases (unless they compile 
their own image from trunk), and so they are missing everything that's been 
done.

There is a lot of value in getting another release out that brings all the gains 
that we have now to everyone. Then development can continue trying to optimize 
things more.

David Lang


More information about the Cerowrt-devel mailing list