[Cerowrt-devel] Router ssh access unavailable on custom build

[Dave Taht]

I would check for the presence of the dropbear-xinetd package and
/etc/xinetd.conf and xinetd.d/ssh

Openwrt uses dropbear (a lightweight ssh clone) directly. Cero uses xinetd
for extra security.

As for your other issues, a 3.3v serial cable is invaluable in
circumstances like this, I typically use a bus pirate to get onto the 4
header pins in the router.

On Jul 6, 2014 10:33 AM, "Ranga Krishnan" <ranga at eff.org> wrote:
>
> Dave,
>
> Appreciate any suggestions debugging the problem below.
>
> I finally flashed a build I made onto the router and it seems to boot
fine and
> is broadcasting the two SSIDs I programed into it but I cant ssh into the
router,
> neither through wireless nor an ethernet cable.
>
> ----------------xxxxxxxxx--------------------
> $:OpenWireless ranga$ ssh root at 172.30.42.1
> ssh: connect to host 172.30.42.1 port 22: Connection refused
> ----------------xxxxxxxxxx-------------------
>
> All ports except 53 seem to be blocked. Even the webserver
> we have running on 80/443 is not responding.
>
> -----------------------xxxxxxxxxxxx-----------------------
> $:OpenWireless ranga$ nmap 172.30.42.1
>
> Starting Nmap 6.46 ( http://nmap.org ) at 2014-07-06 07:23 PDT
> Nmap scan report for 172.30.42.1
> Host is up (0.0010s latency).
> Not shown: 999 closed ports
> PORT   STATE SERVICE
> 53/tcp open  domain
>
> Nmap done: 1 IP address (1 host up) scanned in 2.59 seconds
> ----------------------xxxxxxxxxxxxx-----------------------
>
> I started with the etc directory in 3.10.40-6 and removed a few things
> and made some changes in /etc/config. I kept the /etc/config/firewall
> file unchanged. So I am not sure if it is the firewall blocking the ports.
> Here is a link to the /etc I placed in cerowrt/files directory to have it
> compiled into the build.
>
> https://github.com/TWEFF/OpenWireless/tree/master/etc
>
> Could it be that when building, the permissions with which
> the files are being created in the firmware image are not what
> they need to be, and this is causing the problems I am seeing ?
> Is there any way to analyze the firmware image without flashing
> it onto a router ?
>
> Thanks,
> Ranga
>
>
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20140706/a7b0da21/attachment.html>