[Cerowrt-devel] Fwd: wndr3800 replacement
mcr at sandelman.ca
Sun Mar 30 18:03:35 EDT 2014
Dave Taht <dave.taht at gmail.com> wrote:
>> Dave Taht <dave.taht at gmail.com> wrote: >> that is just fine. I don't
>> expect 24-ports of GbE. >> (I was expecting that cisco switch to do
>> that... sadly no lost packets >> on a $100 unmanaged FE switch...)
>> > I started looking at the edgerouter LTE and related boxes again. >
>> Does anyone else have one?
>> I have ordered the 5-port POE one.
> Does that support gigabit POE?
Unclear... web site says:
10/100/1000 Ethernet ports that support 24V or 48V PoE output
with software-selectable voltage control*
>> My understanding is that it runs Vyatta. I would suspect that given
>> that the
> It is running an older version of vyatta, yes.
>> edgerouter is MIPS, and has "special hardware", that VyOS might not
>> have the
> Not sure what the offloads buy you, except added latency. They are
> easily disabled for testing various qdiscs... (can't remember the
> command offhand)
>> right support for that hardware. I'm going to talk to Ubiquity if I
>> can on Monday. It might not make sense to run *Wrt on this device,
>> not sure.
> There is a pretty modern looking up-to-date build of openwrt for the
> edgerouter, using 3.10, and so on. I am told however, that there are
> some problems with the toolchain, which show up when you try to use
> iptables. Haven't tried it myself (my edgerouter is 60km away), and
> don't know how to flash openwrt onto it in the first place.
> the current edgerouter firmware (v.1.4.1) is based on 3.4.23, and has
> all the bugs in the 3.4 series.
> I backported fq_codel and the latest flow hashing stuff to that
> version; patch 0013 is a little problematic as yet:
why did you backport, rather than move the kernel forward?
Are there custom pieces in 3.4 which need to be forward ported?
] Never tell me the odds! | ipv6 mesh networks [
] Michael Richardson, Sandelman Software Works | network architect [
] mcr at sandelman.ca http://www.sandelman.ca/ | ruby on rails [
More information about the Cerowrt-devel