[Cerowrt-devel] Ubiquiti QOS

Tue May 27 08:23:33 PDT 2014

On Sun, May 25, 2014 at 4:00 PM, <dpreed at reed.com> wrote:

> Not that it is directly relevant, but there is no essential reason to
> require 50 ms. of buffering.  That might be true of some particular
> QOS-related router algorithm.  50 ms. is about all one can tolerate in any
> router between source and destination for today's networks - an upper-bound
> rather than a minimum.
>
>
>
> The optimum buffer state for throughput is 1-2 packets worth - in other
> words, if we have an MTU of 1500, 1500 - 3000 bytes. Only the bottleneck
> buffer (the input queue to the lowest speed link along the path) should
> have this much actually buffered. Buffering more than this increases
> end-to-end latency beyond its optimal state.  Increased end-to-end latency
> reduces the effectiveness of control loops, creating more congestion.
>
>
>
> The rationale for having 50 ms. of buffering is probably to avoid
> disruption of bursty mixed flows where the bursts might persist for 50 ms.
> and then die. One reason for this is that source nodes run operating
> systems that tend to release packets in bursts. That's a whole other
> discussion - in an ideal world, source nodes would avoid bursty packet
> releases by letting the control by the receiver window be "tight"
> timing-wise.  That is, to transmit a packet immediately at the instant an
> ACK arrives increasing the window.  This would pace the flow - current OS's
> tend (due to scheduling mismatches) to send bursts of packets, "catching
> up" on sending that could have been spaced out and done earlier if the
> feedback from the receiver's window advancing were heeded.
>

>
>
> That is, endpoint network stacks (TCP implementations) can worsen
> congestion by "dallying".  The ideal end-to-end flows occupying a congested
> router would have their packets paced so that the packets end up being sent
> in the least bursty manner that an application can support.  The effect of
> this pacing is to move the "backlog" for each flow quickly into the source
> node for that flow, which then provides back pressure on the application
> driving the flow, which ultimately is necessary to stanch congestion.  The
> ideal congestion control mechanism slows the sender part of the application
> to a pace that can go through the network without contributing to buffering.
>

Pacing is in Linux 3.12(?).  How long it will take to see widespread
deployment is another question, and as for other operating systems, who
knows.

See: https://lwn.net/Articles/564978/

>
>
> Current network stacks (including Linux's) don't achieve that goal - their
> pushback on application sources is minimal - instead they accumulate
> buffering internal to the network implementation.
>

This is much, much less true than it once was.  There have been
substantial changes in the Linux TCP stack in the last year or two, to
avoid generating packets before necessary.  Again, how long it will take
for people to deploy this on Linux (and implement on other OS's) is a
question.

> This contributes to end-to-end latency as well.  But if you think about
> it, this is almost as bad as switch-level bufferbloat in terms of degrading
> user experience.  The reason I say "almost" is that there are tools, rarely
> used in practice, that allow an application to specify that buffering
> should not build up in the network stack (in the kernel or wherever it is).
>  But the default is not to use those APIs, and to buffer way too much.
>
>
>
> Remember, the network send stack can act similarly to a congested switch
> (it is a switch among all the user applications running on that node).  IF
> there is a heavy file transfer, the file transfer's buffering acts to
> increase latency for all other networked communications on that machine.
>
>
>
> Traditionally this problem has been thought of only as a within-node
> fairness issue, but in fact it has a big effect on the switches in between
> source and destination due to the lack of dispersed pacing of the packets
> at the source - in other words, the current design does nothing to stem the
> "burst groups" from a single source mentioned above.
>
>
>
> So we do need the source nodes to implement less "bursty" sending stacks.
>  This is especially true for multiplexed source nodes, such as web servers
> implementing thousands of flows.
>
>
>
> A combination of codel-style switch-level buffer management and the stack
> at the sender being implemented to spread packets in a particular TCP flow
> out over time would improve things a lot.  To achieve best throughput, the
> optimal way to spread packets out on an end-to-end basis is to update the
> receive window (sending ACK) at the receive end as quickly as possible, and
> to respond to the updated receive window as quickly as possible when it
> increases.
>
>
>
> Just like the "bufferbloat" issue, the problem is caused by applications
> like streaming video, file transfers and big web pages that the application
> programmer sees as not having a latency requirement within the flow, so the
> application programmer does not have an incentive to control pacing.  Thus
> the operating system has got to push back on the applications' flow
> somehow, so that the flow ends up paced once it enters the Internet itself.
>  So there's no real problem caused by large buffering in the network stack
> at the endpoint, as long as the stack's delivery to the Internet is paced
> by some mechanism, e.g. tight management of receive window control on an
> end-to-end basis.
>
>
>
> I don't think this can be fixed by cerowrt, so this is out of place here.
>  It's partially ameliorated by cerowrt, if it aggressively drops packets
> from flows that burst without pacing. fq_codel does this, if the buffer
> size it aims for is small - but the problem is that the OS stacks don't
> respond by pacing... they tend to respond by bursting, not because TCP
> doesn't provide the mechanisms for pacing, but because the OS stack doesn't
> transmit as soon as it is allowed to - thus building up a burst
> unnecessarily.
>
>
>
> Bursts on a flow are thus bad in general.  They make congestion happen
> when it need not.
>

By far the biggest headache is what the Web does to the network.  It has
turned the web into a burst generator.

A typical web page may have 10 (or even more images).  See the "connections
per page" plot in the link below.

A browser downloads the base page, and then, over N connections,
essentially simultaneously downloads those embedded objects.  Many/most of
them are small in size (4-10 packets).  You never even get near slow start.

So you get an IW amount of data/TCP connection, with no pacing, and no
congestion avoidance.  It is easy to observe 50-100 packets (or more) back
to back at the bottleneck.

This is (in practice) the amount you have to buffer today: that burst of
packets from a web page.  Without flow queuing, you are screwed.  With it,
it's annoying, but can be tolerated.

I go over this is detail in:

http://gettys.wordpress.com/2013/07/10/low-latency-requires-smart-queuing-traditional-aqm-is-not-enough/

So far, I don't believe anyone has tried pacing the IW burst of packets.
 I'd certainly like to see that, but pacing needs to be across TCP
connections (host pairs) to be possibly effective to outwit the gaming the
web has done to the network.
                                                                 - Jim

>
>
>
>
>
>
>
> On Sunday, May 25, 2014 11:42am, "Mikael Abrahamsson" <swmike at swm.pp.se>
> said:
>
>  > On Sun, 25 May 2014, Dane Medic wrote:
> >
> > > Is it true that devices with less than 64 MB can't handle QOS? ->
> > >
> https://lists.chambana.net/pipermail/commotion-dev/2014-May/001816.html
> >
> > At gig speeds you need around 50ms worth of buffering. 1 gigabit/s =
> > 125 megabyte/s meaning for 50ms you need 6.25 megabyte of buffer.
> >
> > I also don't see why performance and memory size would be relevant, I'd
> > say forwarding performance has more to do with CPU speed than anything
> > else.
> >
> > --
> > Mikael Abrahamsson email: swmike at swm.pp.se
> > _______________________________________________
> > Cerowrt-devel mailing list
> > Cerowrt-devel at lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
> >
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20140527/fb6c5dfb/attachment.html>