[Cerowrt-devel] switching to cero

Dave Taht dave.taht at gmail.com
Tue Nov 18 11:45:11 EST 2014

sqm-scripts runs just fine on debian/ubuntu, at least. You do need to
modprobe rather than insmod the modules, and it could really use a
wrapper for debian/redhat/etc et. al. to come up on any given
interface automagically.

Since you are running gentoo, and thus building your own kernels I
happen to have this nifty new code from jonathon morton that might be
better than the sqm scripts if you want to try it.....

On Tue, Nov 18, 2014 at 8:37 AM, James Cloos <cloos at jhcloos.com> wrote:
>>>>>> "WK" == William Katsak <wkatsak at gmail.com> writes:
> WK> Are you doing the NAT, etc. for the ethernet on the edge box and just
> WK> using the 3800 for wifi, or is the edge box doing *only* shaping and
> WK> letting the 3800 do the rest?
> The edge does nat, and I was asking for tips on shaping and the like.
> The 3800 handles wireless and (non-nat) routing between the wireless
> netblocks and the netblock I use for the wired lan.
> -JimC
> --
> James Cloos <cloos at jhcloos.com>         OpenPGP: 0x997A9F17ED7DAEA6
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel

Dave Täht


More information about the Cerowrt-devel mailing list