[Cerowrt-devel] Routing limit question

[Dave Taht]

shape the download only, then measure. shape the upload only, then measure.

On Sun, Oct 19, 2014 at 11:48 AM, Ernesto Elias <ernestogelias at gmail.com> wrote:
> Oh OK I mean I was just wondering because I was trying to figure out what
> should I have put in the sqm tab because I saw that the wndr3800 tops out at
> 50 mbit combined of download and upload right? As of now I have it at 25/25
> on the page. Is that right or should I just shape the upload?
>
> On Oct 19, 2014 2:24 PM, "Dave Taht" <dave.taht at gmail.com> wrote:
>>
>> On at least one verizon device I've tried it appeared that they had
>> SFQ or something similar on egress from the modem.
>>
>>
>> http://www.bufferbloat.net/projects/codel/wiki/RRUL_Rogues_Gallery#Verizon-FIOS-Testing-at-25Mbit-up-and-25Mbit-down
>>
>> So you only needed to shape the download. which is good as we start
>> peaking out at 50Mbit download total. But only measurements can tell.
>>
>>
>> On Sun, Oct 19, 2014 at 10:51 AM, Ernesto Elias <ernestogelias at gmail.com>
>> wrote:
>> > Hello everyone!
>> > I have a question about the wndr3800 routing limit. I went back to the
>> > older
>> > submissions to see if I can find what would be the answer for it. But in
>> > my
>> > search I haven't managed to find a definite answer. From what I seen
>> > about
>> > setting the limit it can do with SQM is 50, 60, or 80 mbit. I'm just
>> > wondering if anyone can shed some light for me here as I have verizon
>> > fios
>> > and my speeds are 50 dl/50 ul. Thank you guys very much!
>> >
>> > _______________________________________________
>> > Cerowrt-devel mailing list
>> > Cerowrt-devel at lists.bufferbloat.net
>> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> >
>>
>>
>>
>> --
>> Dave Täht
>>
>> thttp://www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks



-- 
Dave Täht

thttp://www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks