[Cerowrt-devel] Routing limit question

[Ernesto Elias]

Well Sebastian sir, I am taking your advice and I'm on windows 7 so right
now I'm downloading virtualbox and xubuntu. I don't know if there is one
that you guys recommend. Well... I am new to all this stuff so I'm asking
you to please help me on the subject like after everything is up and
running on the computer, what other steps do I do afterwards and forgive me
like I said I'm new ot all this stuff because I want to be able to find my
link capacity when using SQM. and Thanks for the help!

On Sun, Oct 19, 2014 at 3:55 PM, Sebastian Moeller <moeller0 at gmx.de> wrote:

> Hi Ernesto,
>
> I would recommend to not run the netperf processes on the router you want
> to assess, if possible. Shaping at the rates you are interested in probably
> will take 100% CPU of the router, so there is no slack for running net
> server and netperf instances at the same time. Also I would recommend to
> use netperf-wrapper (https://github.com/tohojo/netperf-wrapper) instead
> of netperfrunner.sh as it allows so much nicer visualization of the
> queueing over time. netperfrunner.sh is great tool for quick testing and
> figuring out link capacities and worst case latency under load increase
> (LULI), but for more thorough comparisons it ain’t made. Netperf-wrapper
> will run under linux and macosx natively, but will also run (well enough)
> in a linux virtual machine on a windows box.
>
>
> Best Regards
>         Sebastian
>
>
> On Oct 19, 2014, at 21:16 , Ernesto Elias <ernestogelias at gmail.com> wrote:
>
> > root at cerowrt:~# /usr/lib/CeroWrtScripts/netperfrunner.sh
> > 2014-10-19 15:10:27 Testing netperf.bufferbloat.net (ipv4) with 4
> streams down a
>
>                    nd up while pinging gstatic.com. Takes about 60
> seconds.
> >  Download:  30.49 Mbps
> >    Upload:  46.52 Mbps
> >   Latency: (in msec, 61 pings, 0.00% packet loss)
> >       Min: 19.848
> >     10pct: 19.958
> >    Median: 20.743
> >       Avg: 21.229
> >     90pct: 22.739
> >       Max: 30.491
> > root at cerowrt:~# /usr/lib/CeroWrtScripts/netperfrunner.sh
> > 2014-10-19 15:11:54 Testing netperf.bufferbloat.net (ipv4) with 4
> streams down a
>
>                    nd up while pinging gstatic.com. Takes about 60
> seconds.
> >  Download:  7.02 Mbps
> >    Upload:  63.68 Mbps
> >   Latency: (in msec, 61 pings, 0.00% packet loss)
> >       Min: 21.690
> >     10pct: 117.997
> >    Median: 153.983
> >       Avg: 150.851
> >     90pct: 180.777
> >       Max: 190.265
> >
> >
> > The first result i gotten by only shaping the uplink and the second
> results are for only shaping the downlink...
> >
> > and for the testing i put 0 on the for the downlink and uplink when I
> was testing for the opposite. and I put 50000 in it when I was shaping it
> for the test. Am I doing it right ?
> >
> > On Sun, Oct 19, 2014 at 2:51 PM, Dave Taht <dave.taht at gmail.com> wrote:
> > shape the download only, then measure. shape the upload only, then
> measure.
> >
> > On Sun, Oct 19, 2014 at 11:48 AM, Ernesto Elias <ernestogelias at gmail.com>
> wrote:
> > > Oh OK I mean I was just wondering because I was trying to figure out
> what
> > > should I have put in the sqm tab because I saw that the wndr3800 tops
> out at
> > > 50 mbit combined of download and upload right? As of now I have it at
> 25/25
> > > on the page. Is that right or should I just shape the upload?
> > >
> > > On Oct 19, 2014 2:24 PM, "Dave Taht" <dave.taht at gmail.com> wrote:
> > >>
> > >> On at least one verizon device I've tried it appeared that they had
> > >> SFQ or something similar on egress from the modem.
> > >>
> > >>
> > >>
> http://www.bufferbloat.net/projects/codel/wiki/RRUL_Rogues_Gallery#Verizon-FIOS-Testing-at-25Mbit-up-and-25Mbit-down
> > >>
> > >> So you only needed to shape the download. which is good as we start
> > >> peaking out at 50Mbit download total. But only measurements can tell.
> > >>
> > >>
> > >> On Sun, Oct 19, 2014 at 10:51 AM, Ernesto Elias <
> ernestogelias at gmail.com>
> > >> wrote:
> > >> > Hello everyone!
> > >> > I have a question about the wndr3800 routing limit. I went back to
> the
> > >> > older
> > >> > submissions to see if I can find what would be the answer for it.
> But in
> > >> > my
> > >> > search I haven't managed to find a definite answer. From what I seen
> > >> > about
> > >> > setting the limit it can do with SQM is 50, 60, or 80 mbit. I'm just
> > >> > wondering if anyone can shed some light for me here as I have
> verizon
> > >> > fios
> > >> > and my speeds are 50 dl/50 ul. Thank you guys very much!
> > >> >
> > >> > _______________________________________________
> > >> > Cerowrt-devel mailing list
> > >> > Cerowrt-devel at lists.bufferbloat.net
> > >> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
> > >> >
> > >>
> > >>
> > >>
> > >> --
> > >> Dave Täht
> > >>
> > >> thttp://www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks
> >
> >
> >
> > --
> > Dave Täht
> >
> > thttp://www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks
> >
> > _______________________________________________
> > Cerowrt-devel mailing list
> > Cerowrt-devel at lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20141019/5e9541ef/attachment-0002.html>