[Cerowrt-devel] Routed LANs vs WOL & Windows troubles

Toke Høiland-Jørgensen toke at toke.dk
Sun Apr 12 14:23:33 EDT 2015

On 12 April 2015 20:18:42 CEST, Kevin Darbyshire-Bryant <kevin at darbyshire-bryant.me.uk> wrote:
> On 12/04/2015 15:29, Toke Høiland-Jørgensen wrote:
> > Kevin Darbyshire-Bryant <kevin at darbyshire-bryant.me.uk> writes:
> >
> >> Yes please!
> > Right, well you can do it in two ways - depending on whether you
> want to
> > use the switch VLAN functionality (this is on the WNDR3800 - no idea
> > what the Archer has). I happen to have one box use the switch VLANs
> and
> > the other not, so both are included below:
> <snip>
> Owww, my head hurts!  I'll look at this after I'd had some sleep and
> don't have the distractions of the in-laws visiting.  I was on the
> verge
> of giving up on 'routed', it has a few days reprieve whilst I think.

Heh, sorry if that was a bit verbose. It is definitely more involved than it should, but once you get the right config, it does work...

> The other access point is a Netgear WNR3500lv2 which doesn't do
> Openwrt
> as far as I can tell :-(  The default firmware in incapable of
> understanding /27 subnets via DHCP, so VLANS are probably too much to
> hope for :-)  Much thought to be done but not today!

Well, in that case it probably also only handles one ssid? If so, you can most probably get away with configuring it for that and plugging it into an interface on the main gateway that you can then isolate (either via switch and vlan config, or straight interface name) and bridge to the appropriate Wi-Fi interface on the gateway...


More information about the Cerowrt-devel mailing list