[Cerowrt-devel] [Bloat] DSLReports Speed Test has latency measurement built-in
MUSCARIELLO Luca IMT/OLN
luca.muscariello at orange.com
Sun Apr 19 05:17:32 EDT 2015
Here is a test from France.
There are not so many servers in Europe I guess.
On 04/19/2015 10:29 AM, Dave Taht wrote:
> This test was taken on linux, about 20 feet and one room away from the
> access point:
> This was taken on the same box, about 10 feet and one room from the
> access point.
> In all cases, the uplink is a comcast box configured for 55Mbit down,
> 5Mbit up and just to make it weird this is a two router configuration,
> where the nearest hop is over a powerline box (TP600) before hitting
> the net.
> I *like* that the test does not let you switch browser tabs (something
> I do instinctively when something takes longer than 3 seconds.)
> On Sat, Apr 18, 2015 at 5:57 PM, Rich Brown <richb.hanover at gmail.com> wrote:
>> I am delighted to pass along the news that Justin has added latency measurements into the Speed Test at DSLReports.com.
>> Go to: https://www.dslreports.com/speedtest and click the button for your Internet link. This controls the number of simultaneous connections that get established between your browser and the speedtest server. After you run the test, click the green "Results + Share" button to see detailed info. For the moment, you need to be logged in to see the latency results. There's a "register" link on each page.
>> The speed test measures latency using websocket pings: Justin says that a zero-latency link can give 1000 Hz - faster than a full HTTP ping. I just ran a test and got 48 msec latency from DSLReports, while ping gstatic.com gave 38-40 msec, so they're pretty fast.
>> You can leave feedback on this page - http://www.dslreports.com/forum/r29910594-FYI-for-general-feedback-on-the-new-speedtest - or wait 'til Justin creates a new Bufferbloat topic on the forums.
>> Bloat mailing list
>> Bloat at lists.bufferbloat.net
More information about the Cerowrt-devel