[Cerowrt-devel] performance numbers from WRT1200AC (Re: Latest build test - new sqm-scripts seem to work; "cake overhead 40" didn't)
Sebastian Moeller
moeller0 at gmx.de
Sun Jun 28 14:23:32 PDT 2015
Hi Mikael,
On Jun 28, 2015, at 22:48 , Mikael Abrahamsson <swmike at swm.pp.se> wrote:
> On Sun, 28 Jun 2015, Sebastian Moeller wrote:
>
>> Hi Mikael,
>
> root at OpenWrt:~# tc -d qdisc
> qdisc htb 1: dev eth0 root refcnt 9 r2q 10 default 12 direct_packets_stat 0 ver 3.17 direct_qlen 532
> qdisc fq_codel 110: dev eth0 parent 1:11 limit 1001p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 120: dev eth0 parent 1:12 limit 1001p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 130: dev eth0 parent 1:13 limit 1001p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc ingress ffff: dev eth0 parent ffff:fff1 ----------------
> qdisc mq 0: dev eth1 root
> qdisc fq_codel 0: dev eth1 parent :1 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :2 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :3 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :4 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :5 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :6 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :7 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :8 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc htb 1: dev ifb4eth0 root refcnt 2 r2q 10 default 12 direct_packets_stat 0 ver 3.17 direct_qlen 32
> qdisc fq_codel 110: dev ifb4eth0 parent 1:11 limit 1001p flows 1024 quantum 500 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 120: dev ifb4eth0 parent 1:12 limit 1001p flows 1024 quantum 1500 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 130: dev ifb4eth0 parent 1:13 limit 1001p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
>
> then I change to cake and add 42 as overhead:
>
> root at OpenWrt:~# tc -d qdisc
> qdisc cake 8003: dev eth0 root refcnt 9 bandwidth 500Mbit diffserv4 flows raw
Cake still did not take the overhead argument (or raw would have gone from the output)
> linklayer ethernet overhead 42
This looks a bit like the output I would expect from using tic’s stab mechanism to define link layer adjustments and per packet overhead.
Could you post the result of:
cat /etc/config/sqm
from the router, please? And the output of
/etc/init.d/sqm stop ; /etc/init.d/sqm start
this might give me a clue where to look...
> qdisc ingress ffff: dev eth0 parent ffff:fff1 ----------------
> qdisc mq 0: dev eth1 root
> qdisc fq_codel 0: dev eth1 parent :1 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :2 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :3 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :4 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :5 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :6 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :7 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :8 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev ifb4eth0 root refcnt 2 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
The ingress setup did not go through, which most likely means tc got unhappy about one of the options.
Thanks for your time in testing this, I fear sqm-scripts is not really in a good shape for cake testing yet.
Best Regars
Sebastian
>
> root at OpenWrt:~# tc -d class show dev eth0
> class cake 8003:508 parent 8003:
> class cake 8003:944 parent 8003:
> root at OpenWrt:~# tc -d class show dev ifb4eth0
> root at OpenWrt:~#
>
> --
> Mikael Abrahamsson email: swmike at swm.pp.se
More information about the Cerowrt-devel
mailing list