[Cerowrt-devel] linksys ac1200 network bug

[Dave Taht]

root at 1200ac:~# uname -a
Linux 1200ac 3.18.23 #1 SMP Sat Nov 28 11:07:32 CET 2015 armv7l n

is my kernel. I see I can optionally build linux 4.0 for the linksys
1200ac at this point. Anyone doing that?
Dave Täht
Let's go make home routers and wifi faster! With better software!
https://www.gofundme.com/savewifi


On Sat, Nov 28, 2015 at 3:41 PM, Dave Taht <dave.taht at gmail.com> wrote:
> I went for a test drive of openwrt DESIGNATED DRIVER (Bleeding Edge,
> r47665) today.
>
> A) I bricked the archer c7 v2. No idea why.
>
> B) I got a sorta working linksys 1200ac build.
>
> The bad news: Any attempt to run 2 or more copies of netperf's
> netserver on the 1200ac router with the default qdiscs (mq +
> fq_codel), at line (gbit) rate, result in it locking up *for any other
> traffic, including ping* until the first netperf is more or less
> complete. I fear the underlying driver is  frightfully overbuffered,
> or has another problem.
>
> http://snapon.cs.kau.se/~d/archer-c7/onenetperflockout.png
>
> (needs BQL, too)
>
> The still bad news: cake works in both directions for a while longer,
> then goes boom similarly.
>
> The somewhat good news:
>
> cake "shaped" to 900mbit on inbound and outbound to the router - does
> not lock up the router. It merely runs out of cpu, but still does
> manage quite respectable throughput in both  directions while doing
> so. Note, I did not say "latency".
>
> http://snapon.cs.kau.se/~d/archer-c7/encouraged.png
>
> As usual there is some flent data in that dir if you want to draw your
> own plots.
>
> I was not in a position to actually test traffic through the router
> (because I had the archer setup to do that)
>
> I wouldn't draw any conclusions from this. Well, a safe conclusion,
> is: don't install this build.
>
> On Sat, Nov 28, 2015 at 11:41 AM, Dave Taht <dave.taht at gmail.com> wrote:
>> Trying to do my first openwrt build in a while.
>>
>> make[5]: Leaving directory
>> '/home/cero4/src/archer-c7/build_dir/target-mips_34kc_musl-1.1.11/dante-1.2.2'
>> Makefile:349: recipe for target 'all' failed
>>
>> I checked: the package "dante" is not installed. Nor can I figure out
>> what package is arbitrarily requiring it.
>>
>> I truly am in hell.
>
> Simple patch for this, It involves invoking a deity.
>
>
>> Dave Täht
>> Let's go make home routers and wifi faster! With better software!
>> https://www.gofundme.com/savewifi