[Cerowrt-devel] trying a pcengines box

[Luis E. Garcia]

How about FQ_CODEL?
Does it eat up the CPU at the same rate when shaping?



On Friday, April 22, 2016, Dave Taht <dave.taht at gmail.com> wrote:

> I have it built and running 16.04 off of the msata card now. :woot:
>
> last major trick - always install openssl-server before rebooting.
>
> (I haven't figured out how to make systemd do a serial console either,
> yet).
>
> I am running tests continuously overnight... I imagine I should
> configure lm-sensors for it? irqbalance?
>
> running cake on it without shaping eats 100% of cpu (1/4th of cpu)
> shaping two ports to 900mbit ate about half but  misbehaved. (never
> got close to 900mbit)
>
>
>
>
> On Fri, Apr 22, 2016 at 10:14 PM, Luis E. Garcia <luis at bitamins.net
> <javascript:;>> wrote:
> > Yes, you just dd the image for the APU2 and then upgrade/downgrade the
> BIOS.
> > When I tried it, it didn't correctly mount the FAT partition, but it was
> > located under /media/SYSLINUX - so if you need to change the ROM this is
> > where you would look for the files.
> >
> > What problem did you have with the mSata drive?
>
>
> >
> >
> >
> > On Friday, April 22, 2016, Dave Taht <dave.taht at gmail.com <javascript:;>>
> wrote:
> >>
> >> ok, I stuck the latest rom on the boot stick, successfully updated the
> >> flash,
> >>
> >> Impressive - there's 1 day old ubuntu 16.04 support for it... I had a
> >> bit of trouble partitioning the msata card
> >> and ended up installing it on a sdcard (am watching it do a netinstall
> >> from the main site *overipv6!* which is a bit slow), will try harder
> >> to get the install more local (not sure how)
> >>
> >>
> >>
> >>
> >>
> >>
> >> On Fri, Apr 22, 2016 at 6:39 PM, Dave Taht <dave.taht at gmail.com
> <javascript:;>> wrote:
> >> > dd-ing the image to a usb stick booted the board. Yea!
> >> >
> >> > It also looks like there is some reasonable, if not complete, openwrt
> >> > support for it...
> >> >
> >> > https://wiki.openwrt.org/toh/pcengines/apu
> >> >
> >> > off to upgrade the bios next.
> >>
> >>
> >>
> >> --
> >> Dave Täht
> >> Let's go make home routers and wifi faster! With better software!
> >> http://blog.cerowrt.org
>
>
>
> --
> Dave Täht
> Let's go make home routers and wifi faster! With better software!
> http://blog.cerowrt.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20160422/6673f491/attachment.html>