[Cerowrt-devel] [Make-wifi-fast] more well funded attempts showing market demand for better wifi

David Lang david at lang.hm
Thu Jun 23 16:10:52 EDT 2016


Well, just using the 5GHz DFS channels in 80MHz or 160 MHz wide chunks would be 
a huge improvement, not many people are using them (yet), and the wide channels 
let you get a lot of data out at once. If everything is within a good range of 
the AP, this would work pretty well. If you end up needing multiple APs, or you 
have many stations, I expect that you will be better off with more APs at lower 
power, each using different channels.

David Lang




On Thu, 23 Jun 2016, Bob McMahon wrote:

> Date: Thu, 23 Jun 2016 12:55:19 -0700
> From: Bob McMahon <bob.mcmahon at broadcom.com>
> To: Dave Taht <dave.taht at gmail.com>
> Cc: make-wifi-fast at lists.bufferbloat.net,
>     "cerowrt-devel at lists.bufferbloat.net"
>     <cerowrt-devel at lists.bufferbloat.net>
> Subject: Re: [Make-wifi-fast] more well funded attempts showing market demand
>     for better wifi
> 
> hmm, I'm skeptical.   To use multiple carriers simultaneously is difficult
> per RF issues.   Even if that is somehow resolved, to increase throughput
> usually requires some form of channel bonding, i.e. needed on both sides,
> and brings in issues with preserving frame ordering.  If this is just
> channel hopping, that needs coordination between both sides (and isn't
> simultaneous, possibly costing more than any potential gain.)   An AP only
> solution can use channel switch announcements (CSA) but there is a cost to
> those as well.
>
> I guess don't see any break though here and the marketing on the site seems
> to indicate something beyond physics, at least the physics that I
> understand.  Always willing to learn and be corrected if I'm
> misunderstanding things.
>
> Bob
>
> On Wed, Jun 22, 2016 at 10:18 AM, Dave Taht <dave.taht at gmail.com> wrote:
>
>> On Wed, Jun 22, 2016 at 10:03 AM, Dave Taht <dave.taht at gmail.com> wrote:
>>>
>> https://www.kickstarter.com/projects/portalwifi/portal-turbocharged-wifi?ref=backerkit
>>>
>>> "Portal is the first and only router specifically engineered to cut
>>> through and avoid congestion, delivering consistent, high-performance
>>> WiFi with greater coverage throughout your home.
>>>
>>> Its proprietary spectrum turbocharger technology provides access to
>>> 300% more of the radio airwaves than any other router, improving
>>> performance by as much as 300x, and range and coverage by as much as
>>> 2x in crowded settings, such as city homes and multi-unit apartments"
>>>
>>> It sounds like they are promising working DFS support.
>>
>> It's not clear what chipset they are using (they are claiming wave2) -
>> but they are at least publicly claiming to be using openwrt. So I
>> threw in enough to order one for september, just so I could comment on
>> their kickstarter page. :)
>>
>> I'd have loved to have got in earlier (early shipments are this month
>> apparently), but those were sold out.
>>
>>
>> https://www.kickstarter.com/projects/portalwifi/portal-turbocharged-wifi/comments
>>
>>
>>>
>>> --
>>> Dave Täht
>>> Let's go make home routers and wifi faster! With better software!
>>> http://blog.cerowrt.org
>>
>>
>>
>> --
>> Dave Täht
>> Let's go make home routers and wifi faster! With better software!
>> http://blog.cerowrt.org
>> _______________________________________________
>> Make-wifi-fast mailing list
>> Make-wifi-fast at lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/make-wifi-fast
>>
>
-------------- next part --------------
_______________________________________________
Make-wifi-fast mailing list
Make-wifi-fast at lists.bufferbloat.net
https://lists.bufferbloat.net/listinfo/make-wifi-fast


More information about the Cerowrt-devel mailing list