[Make-wifi-fast] TCP_NOTSENT_LOWAT applied to e2e TCP msg latency

Stuart Cheshire cheshire at apple.com
Mon Oct 25 23:11:07 EDT 2021


On 21 Oct 2021, at 17:51, Bob McMahon via Make-wifi-fast <make-wifi-fast at lists.bufferbloat.net> wrote:

> Hi All,
> 
> Sorry for the spam. I'm trying to support a meaningful TCP message latency w/iperf 2 from the sender side w/o requiring e2e clock synchronization. I thought I'd try to use the TCP_NOTSENT_LOWAT event to help with this. It seems that this event goes off when the bytes are in flight vs have reached the destination network stack. If that's the case, then iperf 2 client (sender) may be able to produce the message latency by adding the drain time (write start to TCP_NOTSENT_LOWAT) and the sampled RTT.
> 
> Does this seem reasonable?

I’m not 100% sure what you’re asking, but I will try to help.

When you set TCP_NOTSENT_LOWAT, the TCP implementation won’t report your endpoint as writable (e.g., via kqueue or epoll) until less than that threshold of data remains unsent. It won’t stop you writing more bytes if you want to, up to the socket send buffer size, but it won’t *ask* you for more data until the TCP_NOTSENT_LOWAT threshold is reached. In other words, the TCP implementation attempts to keep BDP bytes in flight + TCP_NOTSENT_LOWAT bytes buffered and ready to go. The BDP of bytes in flight is necessary to fill the network pipe and get good throughput. The TCP_NOTSENT_LOWAT of bytes buffered and ready to go is provided to give the source software some advance notice that the TCP implementation will soon be looking for more bytes to send, so that the buffer doesn’t run dry, thereby lowering throughput. (The old SO_SNDBUF option conflates both “bytes in flight” and “bytes buffered and ready to go” into the same number.)

If you wait for the TCP_NOTSENT_LOWAT notification, write a chunk of n bytes of data, and then wait for the next TCP_NOTSENT_LOWAT notification, that will tell you roughly how long it took n bytes to depart the machine. You won’t know why, though. The bytes could depart the machine in response for acks indicating that the same number of bytes have been accepted at the receiver. But the bytes can also depart the machine because CWND is growing. Of course, both of those things are usually happening at the same time.

How to use TCP_NOTSENT_LOWAT is explained in this video:

<https://developer.apple.com/videos/play/wwdc2015/719/?time=2199>

Later in the same video is a two-minute demo (time offset 42:00 to time offset 44:00) showing a “before and after” demo illustrating the dramatic difference this makes for screen sharing responsiveness.

<https://developer.apple.com/videos/play/wwdc2015/719/?time=2520>

Stuart Cheshire


More information about the Cerowrt-devel mailing list