<div>Hi David,</div>
<div> </div>
<div>Yup, I know, I'm not using vlans now. What I meant is that when I tinkered with it, I screwed wired connections.</div>
<div>Hence I offered a working-ethernet config to William.</div>
<div>William, did you have any luck fixing your issue?</div>
<div> </div>
<div>Regards,</div>
<div>Maciej Soltysiak<br><br></div>
<div class="gmail_quote">On Wed, Feb 20, 2013 at 8:29 PM, David Lang <span dir="ltr"><<a href="mailto:david@lang.hm" target="_blank">david@lang.hm</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">you have vlans disabled in this config "option enable_vlan 0"<br><br>if you want to use vlans > 15 you need "option enable_vlan4k 1" as well<br>
<br>David Lang<br><br>On Wed, 20 Feb 2013, Maciej Soltysiak wrote:<br><br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">Date: Wed, 20 Feb 2013 20:17:19 +0100<br>From: Maciej Soltysiak <<a href="mailto:maciej@soltysiak.com" target="_blank">maciej@soltysiak.com</a>><br>
To: William Katsak <<a href="mailto:wkatsak@gmail.com" target="_blank">wkatsak@gmail.com</a>><br>Cc: "<a href="mailto:cerowrt-devel@lists.bufferbloat.net" target="_blank">cerowrt-devel@lists.<u></u>bufferbloat.net</a>"<br>
<<a href="mailto:cerowrt-devel@lists.bufferbloat.net" target="_blank">cerowrt-devel@lists.<u></u>bufferbloat.net</a>><br>Subject: Re: [Cerowrt-devel] Switch Issue
<div>
<div class="h5"><br><br>I recently played with VLANs and screwed up it's switching capability<br>exactly as you say.<br>I managed to fix it by restoring the default setup in /etc/config/network<br>(Especially config switch_vlan and ports)<br>
<br>Compare your /etc/config/network with what I have (and works):<br>config switch<br> option name rtl8366s<br> option reset 1<br> option enable_vlan 0<br> # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms<br>
option blinkrate 2<br> option max_length 3<br><br>config switch_vlan<br> option device rtl8366s<br> option vlan 1<br> option ports "0 1 2 3 5t"<br><br>config switch_port<br>
# Port 1 controls the GREEN configuration of LEDs for<br> # the switch and the section does not correspond to a real<br> # switch port.<br> #<br> # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;<br>
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;<br> # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;<br> # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);<br> # 14: Link (master); 15: separate register<br>
<br> option device rtl8366s<br> option port 1<br> option led 6<br><br>config switch_port<br> # Port 2 controls the ORANGE configuration of LEDs for<br> # the switch and the section does not correspond to a real<br>
# switch port.<br> #<br> # See the key above for switch port 1 for the meaning of the<br> # 'led' setting below.<br><br> option device rtl8366s<br> option port 2<br>
option led 9<br><br>config switch_port<br> # Port 5 controls the configuration of the WAN LED and the<br> # section does not correspond to a real switch port.<br> #<br> # To toggle the use of green or orange LEDs for the WAN port,<br>
# see the LED setting for wndr3700:green:wan in /etc/config/system.<br> #<br> # See the key above for switch port 1 for the meaning of the<br> # 'led' setting below.<br><br> option device rtl8366s<br>
option port 5<br> option led 2<br><br>Best regards,<br>Maciej Soltysiak<br><br>On Wed, Feb 20, 2013 at 5:01 PM, William Katsak <<a href="mailto:wkatsak@gmail.com" target="_blank">wkatsak@gmail.com</a>> wrote:<br>
<br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">Hello,<br><br>Just wanted to see if anyone has seen an issue like this:<br><br>I have a 3800 running Sugarland at a remote site. It was running nice and<br>
reliably, connected to the local network by a VLAN trunked connection (I<br>have interfaces for the default VLAN, and VLANS 100 and 200 passing<br>through). Last night it suddenly stopped working. There seems to be no data<br>
flowing through the switch at all, even though I can ssh to the router,<br>reboot, poke at it, etc. from over the Internet.<br><br>I see no error messages regarding the switch in the logs or dmesg. Anyone<br>else see a 3800 switch crap out unceremoniously?<br>
<br>Thanks,<br>Bill Katsak<br><br><br><br>______________________________<u></u>_________________<br>Cerowrt-devel mailing list<br><a href="mailto:Cerowrt-devel@lists.bufferbloat.net" target="_blank">Cerowrt-devel@lists.<u></u>bufferbloat.net</a><br>
<a href="https://lists.bufferbloat.net/listinfo/cerowrt-devel" target="_blank">https://lists.bufferbloat.net/<u></u>listinfo/cerowrt-devel</a><br><br></blockquote></div></div></blockquote><br>_______________________________________________<br>
Cerowrt-devel mailing list<br><a href="mailto:Cerowrt-devel@lists.bufferbloat.net">Cerowrt-devel@lists.bufferbloat.net</a><br><a href="https://lists.bufferbloat.net/listinfo/cerowrt-devel" target="_blank">https://lists.bufferbloat.net/listinfo/cerowrt-devel</a><br>
<br></blockquote></div><br>